Short brake lever specific to many models Detailed list of compatibilities per motorcycle & year below. If you want a color combination we don’t suggest (between main part of the lever and 6 positions dial), you can specify your choice (8 available colors) in the comment before you finalize...

Pair of universal LED turn signals in aluminum. Number of LED on each indicator : 15 Length (out of screw thread) : 36 mm Width / Diameter : 28 mm Screw diameter : 8 mm Wires length : 440 mm NOTE :  Before ordering, just make sure...

Pair of rear (passenger) footrests, aftermarket model based on the OEM, specific many  KAWASAKI  models.  You will find the motorcycles compatibility list below.    Caution  : in some case the provided hardware may not be a perfect match depending on the motorcycle model. If so, you can re-use the hardware...

Pair of front footrests, aftermarket model based on the OEM, specific for the following for  many KAWASAKI (see compatibility list below). Caution : these foot-pegs will perfectly, but in some case the provided hardware may not be a perfect match...

Pair of adhesive tank traction pads, to be installed on the flanks of the tank. Specific model for  Kawasaki :    ZX10-R  2011 - 2015    These protections are proposed in 2 different colors, perfect for a discreet look while offering a cool design to your...

Front Brake fluid reservoir cap for many  KAWASAKI and MV AGUSTA  models. You will find the motorcycles compatibility list below.   Technical informations : Diameter : 56mm Only suitable for BREMBO Front Brake Master Cylinder reservoirs (Axial AND Radial). If you...

Rear-view mirrors block-off plates for many  KAWASAKI  models. You will find the motorcycles compatibility list below.   Distance between the fastening points : 47mm   Sold by pair.

Pair of adhesive grips for the tank sides (right and left traction pads). Specific for KAWASAKI :     ZX-10R Ninja 2011 - 2015 ZX10-R ZX10RR / SE 2016 - 2020         Non-slip with a finish similar to sandpaper (type 240 for beginner in car painting).

Automatic tie down strap with ratchet tensioner and its 2 hooks to secure the bike transport.    Measurements and technical information : LENGTH : 18 cm Unwound LENGTH : 1,6 m WIDTH : 2,6 cm FIXATION TYPE : "S" Hooks with rubber protection    Sold by...

Front Sprocket RENTHAL Classic - 14 teeth : 289-525-14P Made In England The front sprocket has a width of 525. List of the compatibilities under the description. Any product that has been opened, assembled or has traces of handling cannot be returned, exchanged or refunded. Top brand products in stock at incredible prices,...

Specific adhesive seat foam for race fairings KAWASAKI :    <td style="border:1px solid #cccccc;padding:2px...

Set of EBC brake pads intended for use on the road Pads approved for road use (TÜV approved) IMPORTANT: Please read the description below to find out what each range of plates we offer corresponds to. We do not offer any other range(s) than the one(s) shown here. You will find the list of compatible motorbikes below in the description.

Pair of universal  LED  turn signals in aluminum and an orange lighting.  Number of LED on each turn signal : 17 Length (out of screw thread) : 86 mm Width : 38 mm Screw diameter : 8 mm Wires length : 210 mm

Pair of universal  LED  turn signals in aluminum. New model with 1 powerful LED light, orange color.

Pair of universal rubber and anodised aluminum handlebar grips with an internal diameter of  22 mm  on the left side (clutch) and  24 mm  on the right side (throttle).   Measures : Length: 120 mm Depth: Hollow...

Pair of universal  LED  turn signals in plastic with orange lighting and a blinking indicator on the rear of the turn signals, towards the pilot (blinking on both sides).

Pair of universal LED turn signals in aluminum. E8 E-marked model, with 9 LED and an orange light.

Pair of universal  LED  turn signals in aluminum.  E8 E-marked  model, with  an orange light. All the universal turn signals models we propose are visible on the last photo!

Pair of universal  LED  turn signals in plastic with 8 LEDs and an orange light.

Pair of universal  LED  turn signals in plastic.  E8 E-marked  model, with 15 LED and an orange light. Design with a center hole. For installation on MT07 / FZ07, you must install and reverse a  turn signal shutter  so the nut can be screwed on the turn signal's rod.