Long brake lever specific to many models. Detailed list of compatibilities per model available below. If you want a colour combination (lever's body and adjuster) that is not proposed in the list below, please specify you choice (within the 8 colours we propose) in your order's comment section.

Flat handlebar in anodised machined aluminum. Universal model.     Outer diameter at end and center : 22,2 mm (often indicated as 22 mm) Inside diameter: 14 mm, not threaded Weight : EXTRA LOW - 535 gr / STREET FIGHTER - 560 gr / MEDIUM - 570 gr     Important:...

Universal mounting bracket in steel for round headlights. This model will perfectly fit and adjust without any modification on all forks with a diameter between 33 mm to 43 mm. Sold by pair.

Pair of universal rubber and anodised aluminum handlebar grips with an internal diameter of  22 mm  on the left side (clutch) and  24 mm  on the right side (throttle).   Measures : Length: 120 mm (+ 13 mm with end caps) Depth:...

Aftermarket rear brake fluid reservoir kit including the plastic reservoir + the anodized aluminum cap. Universal model. To avoid mistakes, we invite you to check the type of fastening of your original reservoir before ordering. Height: About 45mm Width: ...

Pair of anodized aluminum bar end plugs, available in several colors. Universal flat model, with a discreet offset.   Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided). These handlebar caps can also be installed on handlebars with an integrated 6mm threaded spot (6 mm screw provided)....

Pair of universal LED turn signals in plastic with 5 SMD  LEDs  on the front, and 3 SMD LEDs on the rear side, both in orange.

Cable clutch perch, High End model in anodised aluminum. Universal for all the motorcycles equipped with a cable clutch. Will fit on all handlebars with a 22mm outer diameter. Sold with an anodised lever, to be selected among : - A short or long clutch lever (no additive cost) - Adjustable in length and foldable in case of a fall (+10€ additive...

Relax cruise control throttle grip for right side handlebar grip. Made in plastic, it will easily install directly on your throttle grip and will allow you to relax your wrist during long journeys. Universal model, will fit on nearly all accelerator grips.

Universal mechanical watch, to be installed on all handlebars with an outer diameter of 22 or 25 mm. Check the available space on your handlebars to make sure you can install it. Measures : Outer diameter : 45mm Height (above handle-bars) : 12mm, the rest will be integrated into the handle bars  Battery not included.

Universal anodised aluminum right-angle valve stems.   Diameter: 8.3 mm. Important : suitable for Italian and English models, however this model is NOT suitable for Japanese brands, which usually need an 11.3 mm diameter.   Dimensions : Thread length :...

Motorbike tubular and universal insurance slip or tax disc. Length of the tube : 6 cm Diameter : 2.3 cm Diameter of the mounting hole : 0.8 cm

Adjustable / Foldable (Flip-Up) clutch lever specific to many  APRILIA, DUCATI, BIMOTA, MOTO GUZZI, MOTO MORINI, BENELLI and VOXAN. Detailed list of compatibilities per motorcycle and year below. If you...

Windscreen universal spoiler for motorcycles and scooters, with CNC aluminum fastenings for a direct installation on your existing windshield.   Spoiler screen's measures : 27cm x 13cm (10,63" x 5,12")

Pair of clip on handlebars (right AND left clip ons) designed for 50mm diameter forks, consisting of a pair of clamps and a pair of anodized CNC aluminum tubes.    Dimensions: Length of the tubes: 30 cm Outside diameter of the tubes: 22 mm Tube’s inner diameter : 16mm Angle of...

Pair of universal  LED  turn signals in plastic with a 3 LED light on the rear side of the turn signals, towards the pilot (white color).

Pair of universal  LED  turn signals in aluminum. New model with 1 powerful LED light, orange color.

Pair of rearview mirrors (left AND right mirrors) in machined and anodised aluminum with integrated LED turn indicators.   Hardware kit provided.   Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale on our store).

Pair of riser adjustments for tapered handlebars with a 28mm external diameter at the center. Available in different colours. Anodized machined aluminum risers with a 6-months warranty on anodizing. Total height : 50 mm Mounting bolt diameter : 10 mm

Pair of rearview mirrors, with CNC anodised aluminum arm and plastic mirror shell, with LED integrated turn signals.   Universal model for Naked, Sportbikes and Sport GT motorcycles (with adapters for the latter).