Pair of universal LED turn signals in plastic with orange lighting and a blinking indicator on the rear of the turn signals, towards the pilot (blinking on both sides).
Pair of universal LED turn signals in plastic with orange lighting and a blinking indicator on the rear of the turn signals, towards the pilot (blinking on both sides).
Pair of universal LED turn signals in plastic. E8 E-marked model, with 15 LED and an orange light. Design with a center hole.
For installation on MT07 / FZ07, you must install and reverse a turn signal shutter so the nut can be screwed on the turn signal's rod.
Pair of universal LED turn signals in plastic. E8 E-marked model, with 15 LED and an orange light. Design with a center hole.
For installation on MT07 / FZ07, you must install and reverse a turn signal shutter so the nut can be screwed on the turn signal's rod.
Pair of universal LED turn signals in aluminum and an orange lighting.
Number of LED on each turn signal : 17
Length (out of screw thread) : 86 mm
Width : 38 mm
Screw diameter : 8 mm
Wires length : 210 mm
Pair of universal LED turn signals in aluminum and an orange lighting.
Number of LED on each turn signal : 17
Length (out of screw thread) : 86 mm
Width : 38 mm
Screw diameter : 8 mm
Wires length : 210 mm
Kit of reclining and raising clip on bracelets + handlebar tubes, designed to be installed on all motorcycles with front forks having a 41mm diameter.
Sold by pair (right AND left).
List of compatibility per motorcycle models (non exhaustive) available at...
Kit of reclining and raising clip on bracelets + handlebar tubes, designed to be installed on all motorcycles with front forks having a 41mm diameter.
Sold by pair (right AND left).
List of compatibility per motorcycle models (non exhaustive) available at...
Pair of license plate LED lights. Mounted on a M5 integrated threaded screw (diameter 5 mm) for a direct and discreet installation on the license plate holder.
Sold by pair only.
Pair of license plate LED lights. Mounted on a M5 integrated threaded screw (diameter 5 mm) for a direct and discreet installation on the license plate holder.
Sold by pair only.
Pair of universal rubber and anodised aluminum handlebar grips with an internal diameter of 22 mm on the left side (clutch) and 24 mm on the right side (throttle).
Measures :
Length: 120 mm
Depth: Hollow...
Pair of universal rubber and anodised aluminum handlebar grips with an internal diameter of 22 mm on the left side (clutch) and 24 mm on the right side (throttle).
Measures :
Length: 120 mm
Depth: Hollow...
Pair of universal rubber and anodised aluminum handlebar grips with an internal diameter of 22 mm on the left side (clutch) and 24 mm on the right side (throttle).
Measures :
Length: 120 mm (+ 13 mm with end caps)
Depth:...
Pair of universal rubber and anodised aluminum handlebar grips with an internal diameter of 22 mm on the left side (clutch) and 24 mm on the right side (throttle).
Measures :
Length: 120 mm (+ 13 mm with end caps)
Depth:...
Lever guards made of anodized aluminum. Universal model with fasteners adaptable to all handlebars with an inner diameter of 14 or 18 mm.
The length of the protection is adjustable (see photos), and the end tip reclining. Available in different colors. Sold by pairs only.
Lever guards made of anodized aluminum. Universal model with fasteners adaptable to all handlebars with an inner diameter of 14 or 18 mm.
The length of the protection is adjustable (see photos), and the end tip reclining. Available in different colors. Sold by pairs only.
Pair of handlebar risers for motorcycles with a 22mm external diameter handlebar. Available in different colours.
Anodized machined aluminum risers, with a 6-months warranty on anodizing, hardware included.
Pair of handlebar risers for motorcycles with a 22mm external diameter handlebar. Available in different colours.
Anodized machined aluminum risers, with a 6-months warranty on anodizing, hardware included.
Pair of rear (passenger) footrests, aftermarket model based on the OEM, specific many KAWASAKI models. You will find the motorcycles compatibility list below.
Caution : in some case the provided hardware may not be a perfect match depending on the motorcycle model. If so, you can re-use the hardware...
Pair of rear (passenger) footrests, aftermarket model based on the OEM, specific many KAWASAKI models. You will find the motorcycles compatibility list below.
Caution : in some case the provided hardware may not be a perfect match depending on the motorcycle model. If so, you can re-use the hardware...
Pair of front footrests, aftermarket model based on the OEM, specific for the following for many KAWASAKI (see compatibility list below).
Caution : these foot-pegs will perfectly, but in some case the provided hardware may not be a perfect match...
Pair of front footrests, aftermarket model based on the OEM, specific for the following for many KAWASAKI (see compatibility list below).
Caution : these foot-pegs will perfectly, but in some case the provided hardware may not be a perfect match...
Pair of resistors for LED turn indicators.
Sold by pairs. 1 pair of resistors is necessary for 1 pair of LED turn signals (USUALLY enough, although we cannot take responsibility if it is not : on some rare models you may need more than 1 resistor per blinker).
Power : 10W 10 ohm
Pair of resistors for LED turn indicators.
Sold by pairs. 1 pair of resistors is necessary for 1 pair of LED turn signals (USUALLY enough, although we cannot take responsibility if it is not : on some rare models you may need more than 1 resistor per blinker).
Power : 10W 10 ohm
Pair of rearview mirrors (left AND right mirrors) in machined and anodised aluminum with integrated LED turn indicators.
Hardware kit provided.
Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale on our store).
Pair of rearview mirrors (left AND right mirrors) in machined and anodised aluminum with integrated LED turn indicators.
Hardware kit provided.
Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale on our store).
Universal anodised aluminum right-angle valve stems.
Diameter: 11.3 mm. Important : suitable for Japanese models, however this model is NOT suitable for Italian and English brands, which usually need an 8.3 mm diameter.
Dimensions :
Thread length : 10mm
Useful length under the valve :...
Universal anodised aluminum right-angle valve stems.
Diameter: 11.3 mm. Important : suitable for Japanese models, however this model is NOT suitable for Italian and English brands, which usually need an 8.3 mm diameter.
Dimensions :
Thread length : 10mm
Useful length under the valve :...