License plate light (3 LED).

Aluminum license plate light with 4 LED lights. Flat model, without threaded screws. Sold with 2 screws to install it (mounting at the bottom).   Measures : 56mm x 20 mm  Distance between the two fastening points : 45mm  

Universal booster net, for your helmet or lugguages. Measures : 40 x 40 cm

Aftermarket brake fluid reservoir kit including the plastic reservoir + the anodized aluminum cap + the anodized aluminum bracket. Fits on almost all motorcycles with a separate brake fluid reservoir from the master cylinder Hose provided, but it is strongly recommended to keep the original one. The supplied one...

Adjustable / Foldable (Flip-Up) brake lever specific to many  models : Detailed list of compatibilities per motorcycle and year below. If you want a color combination we don’t suggest (between main part of the lever, 6 positions dial and adjustable part),...

Short brake lever specific to many models. Detailed list of compatibilities per model of motorcycle available below. If you want a colour combination (lever's body and adjusting wheel) that is not proposed in the list below, please specify you choice (within the 8 colours we propose) in your order's comment's section.

Long brake lever specific to many models. Detailed list of compatibilities per motorcycle and year available below. If you want a color combination we don’t suggest (between main part and 6 positions dial), specify your choice within the 8 available colors in comments before finalizing...

Universal wheel rim tape, solid color. Model set on roller, for a straight stripe laying. Ready to apply on 17” clean rims.   Width : 7 mm Length : 6m

Front LED headlight. Round adaptable model. Measures : Diameter : 7 inch (17,78 cm) Profondeur : 3,74 inch (9,5 cm) LED bulbs included in the font light, 3 pins connector similar to H4 ones that can be found on nearly all round headlights equipped naked motorbikes.

Full pack containing :   - An universal adjustable and foldable license plate holder - license plate lighting 3 LEDs (REF EDP1)

Pair of anodized aluminum bar end plugs, available in several colors. Universal bi-color model, with a 10mm long and 18mm diameter offset at the base.   Fits on all handlebars with an internal diameter of  14mm  or  18mm  (adapters provided) or with an integrated  6mm  threaded spot (6 mm screw provided).  Remember to check...

Pair of anodized aluminum bar end plugs, available in several colors. Universal model with a covering plastic cap.   Fits on all handlebars with an internal diameter of  14mm  or  18mm  (adapters provided). These handlebar caps can also be installed on handlebars with an integrated  6mm  threaded spot (6 mm screw provided)....

Pair of anodized aluminum bar end plugs, available in several colors. Universal flat model, with a discreet offset.   Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided). These handlebar caps can also be installed on handlebars with an integrated 6mm threaded spot (6 mm screw provided)....

Anodised universal valve caps, different colors available. Sold by pairs.

Universal valve caps for all motorcycles and scooters. Grenade shape. Sold by pair.

Pair of universal  LED  turn signals in aluminum.  E8 E-marked  model, with  an orange light. All the universal turn signals models we propose are visible on the last photo!

Pair of universal  LED  turn signals in plastic with orange lighting and a blinking indicator on the rear of the turn signals, towards the pilot (blinking on both sides).

Pair of universal LED turn signals in aluminum. Number of LED on each indicator : 15 Length (out of screw thread) : 36 mm Width / Diameter : 28 mm Screw diameter : 8 mm Wires length : 440 mm NOTE :  Before ordering, just make sure...

Pair of universal LED turn signals in plastic with 5 SMD  LEDs  on the front, and 3 SMD LEDs on the rear side, both in orange.

Pair of universal LED turn signals in aluminum. E8 E-marked model, with 9 LED and an orange light.