Aftermarket brake fluid reservoir kit including the plastic reservoir + the anodized aluminum cap + the anodized aluminum bracket. Fits on almost all motorcycles with a separate brake fluid reservoir from the master cylinder Hose provided, but it is strongly recommended to keep the original one. The supplied one...

Universal wheel rim tape. Racing model, pre-cut in 1/3. 12 parts, designed to equip a complete motorcycle. 3 parts per rim side.   Ready to apply on 17” clean rims.   Width : 6mm

Universal wheel rim tape, solid color. Model set on roller, for a straight stripe laying. Ready to apply on 17” clean rims.   Width : 7 mm Length : 6m

Pair of anodized aluminum bar end plugs, available in several colors. Universal bi-color model, with a 10mm long and 18mm diameter offset at the base.   Fits on all handlebars with an internal diameter of  14mm  or  18mm  (adapters provided) or with an integrated  6mm  threaded spot (6 mm screw provided).  Remember to check...

Pair of anodized aluminum bar end plugs, available in several colors. Universal flat model, with a discreet offset.   Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided). These handlebar caps can also be installed on handlebars with an integrated 6mm threaded spot (6 mm screw provided)....

Pair of universal  LED  turn signals in plastic with a 3 LED light on the rear side of the turn signals, towards the pilot (white color).

Pair of universal LED turn signals in plastic with 5 SMD  LEDs  on the front, and 3 SMD LEDs on the rear side, both in orange.

Pair of universal  LED  turn signals in plastic, with 17 LED and an orange light.

Universal USB plug / charger.  Model with USB output in 5V , sold with its handlebar fastening system.    Length of the wires for the connection to your motorcycle battery / wire harness : 110 cm Socket diameter : 27 mm

6 parts universal tank pad protection, adaptable on all gas tanks.

Universal mechanical watch, to be installed on all handlebars with an outer diameter of 22 or 25 mm. Check the available space on your handlebars to make sure you can install it. Measures : Outer diameter : 45mm Height (above handle-bars) : 12mm, the rest will be integrated into the handle bars  Battery not included.

Rear brake fluid reservoir  cap for many KAWASAKI  models. Compatibility list available below.   Inner Diameter: 30mm

Side kickstand foot enlarger, in anodized aluminum, specific  for many  KAWASAKI  models. You will find the motorcycles compatibility list below.   

OEM gas cap adhesive protection specific KAWASAKI .   Compare the shape of the models on the pictures with your gas hatch to make sur of a good compatibility.

Adhesive tank pad protection, design ZX6R Different colors available – You choose !

Wheel rim tape with ZX-6R  logo.   Racing model, pre-cut in 1/4, 16 parts designed to make a complete motorcycle. 3 parts per side of the front and rear rims with 8 bonus strips.   Width : about 1 cm.

Wheel rim tape with NINJA   logo.   Racing model, pre-cut in 1/4, 16 parts designed to make a complete motorcycle. 3 parts per side of the front and rear rims with 8 bonus strips.   Width : about 1 cm.

Adhesive tank pad protection, design  Supersport . Designed for many  HONDA , KAWASAKI, SUZUKI, YAMAHA, TRIUMPH..   models.   MEASURES (L x H) :  220mm x 170mm

Tail fairing, injected ABS quality, specific for the following KAWASAKI models :    ZX-6R Ninja 2019 - 2024     Remarque  : The UNPAINTED / RAW tail fairing colour can vary, thus, the ABS plastic colour may be black or white.    Unpainted parts are raw parts. They may have traces of mouldings that need to...

Box of heat shrink tubings / sleeves made of polyolefin. The kit is composed of 150 pieces. For details, please refer to the table below.