6 parts universal tank pad protection, adaptable on all gas tanks.

Aftermarket brake fluid reservoir kit including the plastic reservoir + the anodized aluminum cap + the anodized aluminum bracket. Fits on almost all motorcycles with a separate brake fluid reservoir from the master cylinder Hose provided, but it is strongly recommended to keep the original one. The supplied one...

Universal USB plug / charger.  Model with USB output in 5V , sold with its handlebar fastening system.    Length of the wires for the connection to your motorcycle battery / wire harness : 110 cm Socket diameter : 27 mm

Pair of flush-mount indicators (left AND right) for   HONDA  :     CBR 600RR 2003 - 2016 and 1000RR 2004 - 2007 Screw-in model, mounted on a threaded screw and provided with a retaining nut for a direct integration in place of your original turn...

Pair of anodized aluminum bar end plugs, available in several colors. Universal flat model, with a discreet offset.   Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided). These handlebar caps can also be installed on handlebars with an integrated 6mm threaded spot (6 mm screw provided)....

Pair of universal LED turn signals in plastic with 5 SMD  LEDs  on the front, and 3 SMD LEDs on the rear side, both in orange.

Universal mechanical watch, to be installed on all handlebars with an outer diameter of 22 or 25 mm. Check the available space on your handlebars to make sure you can install it. Measures : Outer diameter : 45mm Height (above handle-bars) : 12mm, the rest will be integrated into the handle bars  Battery not included.

OEM gas cap adhesive protection, specific for the following HONDA.   Compare the shape of the models on the pictures with your gas hatch to make sur of a good compatibility.       IMPORTANT : your original gas cap must look like the one below  : <div...

Adhesive tank pad protection, design  CBR FIREBLADE. Fits on many HONDA tanks (Detailed list below). Different colors available – You choose !

Wheel rim tape with CBR600RR   logo.    Racing model, pre-cut in 1/4, 16 parts designed to make a complete motorcycle. 3 parts per side of the front and rear rims with 8 bonus strips.    Width : about 1 cm.

Wheel rim tape with CBR   logo.   Racing model, pre-cut in 1/4, 16 parts designed to make a complete motorcycle. 3 parts per side of the front and rear rims with 8 bonus strips.   Width : about 1 cm.

Side kickstand foot enlarger, in anodized aluminum, specific for the following  HONDA  :       CBR 600RR 2007 - 2008 CBR 600-RR 2009 - 2012 CBR600 RR 2013 - 2017     Dear Bikers, please note that this kickstand foot enlarger is designed to be installed...

Pair of front flashers covers (right AND left lenses) for many  HONDA  models.    You will find the motorcycles compatibility list below.    These glasses are sold alone. Halogen bulbs are NOT included.   If you need lighting, we also offer LED bulbs (orange lighting). They are proposed with the direct link...

Pair of Rear flashers covers (right AND left lenses) for many  HONDA  models.    You will find the motorcycles compatibility list below.    These glasses are sold alone. Halogen bulbs are NOT included.   If you need lighting, we also offer LED bulbs (orange lighting). They are proposed with the direct link...

Adhesive tank pad protection, design  Supersport . Designed for many  HONDA , KAWASAKI, SUZUKI, YAMAHA, TRIUMPH..   models.   MEASURES (L x H) :  220mm x 170mm

Box of heat shrink tubings / sleeves made of polyolefin. The kit is composed of 150 pieces. For details, please refer to the table below.

Assortment box of insulated electrical crimp connectors - 180 pcs    3 different sizes Red : for cables with a cross-section of up to 1.5mm². Blue : for cables with cross-sections from 1 to 2.5mm². Yellow : for cables with cross-sections from 2.6 to 6mm². <p...

Pair of anodised aluminum fork pre load adjusters. Available diameters : 14 mm , 17 mm , 19 mm , 22 mm

3D Adhesive covering film, available in different carbon colors. Suitable for various uses, adaptable to all your projects and at the height of your imagination!    Dimensions per unit (x1): 1.27m x 0.5m and 0.15mm thick.

Multi-position hinged brake fluid reservoir bracket in anodized aluminum.