Pair of rearview mirrors (left AND right mirrors) in machined and anodised aluminum. Different colors available, hardware kit provided. Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale on our store).

Anodized aluminum passenger hand grip, installation on fuel tank’s cap. Specific for numerous YAMAHA models.    CAUTION : fits on OEM fuel tank caps with 5 or 7 mounting holes. For models with 7 mounting holes, you will need to file down the two small unused fastening offsets on the non-visible part of the...

Engine cover protection crash pad specific for the following YAMAHA models:        <tr...

Pair of rearview mirrors (left AND right mirror) in anodised aluminum.    This oval model can install in different manners : bar-end or directly on the handlebar itself.   CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars.   Please read the description below to check installation possibilities and advices....

Touring Polycarbonate Windscreen, specific to the following YAMAHA :     MT-10 / SP 2022 - 2024    Better protection than the original bubble Sophisticated design, perfect adaptability Plug &amp; Play, no modifications needed during assembly  Resistant and durable in time ...

Quick release petrol cap with key, specific to many  YAMAHA . Machined aluminium gas cap Anodised for a better finish Quick release cap by pressing Secure thanks to the special key required to open it Choice of colours for the central cap Hard plastic key  Supplied with key ...

Aftermarket starter engine cover, specific to the following YAMAHA  :     <td style="border:1px solid...

CNC aluminum license plate holder, specific to the following  YAMAHA :     <tr...

Set of EBC brake pads intended for use on the road Pads approved for road use (TÜV approved) IMPORTANT: Please read the description below to find out what each range of plates we offer corresponds to. We do not offer any other range(s) than the one(s) shown here. You will find the list of compatible motorbikes below in the description.

Cable clutch perch, High End model in anodised aluminum. Universal for all the motorcycles equipped with a cable clutch. Will fit on all handlebars with a 22mm outer diameter. Sold with an anodised lever, to be selected among : - A short or long clutch lever (no additive cost) - Adjustable in length and foldable in case of a fall (+10€ additive...

Front fender made of injected ABS plastic, specific for YAMAHA :   <td style="border:1px solid #cccccc;padding:2px...

Protection pads set including : one slider for front fork and one slider for swingarm, specific to the following YAMAHA models :     <col width="100"...

Engine cover protection set in hard plastic and nylon fiber, specific to the following YAMAHA models :     MT-10 / SP / Tourer 2016 - 2020     ...

Sport Polycarbonate Windscreen, specific to the following  YAMAHA  :     MT-10 / SP 2022 - 2024    Better protection than the original bubble Sophisticated design, perfect adaptability Plug &amp; Play, no modifications needed during assembly  Resistant and durable in time ...

Specific adjustable steel side stand  YAMAHA:       <td style="font-family:Rubik;border:1px solid...

Performance Friction “Carbon Metallic” brake pad set (PFC Brakes).    1 unit corresponds to 1 set of pads for 1 calliper.    See list of compatible models at the bottom of the description (pad form also available in photos)    Suitable for : Front and/or Rear callipers ...

Flat handlebar in anodised machined aluminum. Universal model.    Outer diameter at the handlebar’s end: 22,2 mm Outer diameter in the center of the handlebar: 28,6mm (often indicated as 28 mm) Inside diameter: 14 mm, not threaded Weight : 630 gr    <p...

Pair of rearview mirrors with integrated LED turn signals. Universal model for all naked motorcycles for which the mirrors fastenings are threaded rods (10mm).   Will require an adapter for the right mirror on YAMAHA motorcycles, and for all motorbikes' models which have a reversed thread fastening mirror. 

Quick release (1/4 turn) gas cap in anodised aluminum, specific for tmany YAMAHA models (complete compatibility list available below).   Sold with a spare seal and the necessary hardware.     IMPORTANT : your original gas cap must look like the one below...

Pair of universal risers in anodised machined aluminum, suitable for all motorcycles with a 28 mm diameter handlebar.      Height of the riser :  25  mm Offset : 20 mm        Sold by pair. Hardware included.