Side kickstand foot enlarger, in anodized aluminum, specific for the following  YAMAHA  :       MT-10 STANDARD & SP 2016 - 2020     Dear Bikers, please note that this kickstand foot enlarger is designed to be installed on a new, undamaged side stand. In case of a...

Aftermarket brake fluid reservoir kit including the plastic reservoir + the anodized aluminum cap + the anodized aluminum bracket. Fits on almost all motorcycles with a separate brake fluid reservoir from the master cylinder Hose provided, but it is strongly recommended to keep the original one. The supplied one...

Box of heat shrink tubings / sleeves made of polyolefin. The kit is composed of 150 pieces. For details, please refer to the table below.

Wheel rim tape with MT   logo.   Racing model, pre-cut in 1/4, 16 parts designed to make a complete motorcycle. 3 parts per side of the front and rear rims with 8 bonus strips.   Width : about 1 cm.

Wheel rim tape with MT-10   logo.   Racing model, pre-cut in 1/4, 16 parts designed to make a complete motorcycle. 3 parts per side of the front and rear rims with 8 bonus strips.   Width : about 1...

Universal wheel rim tape. Racing model, pre-cut in 1/3. 12 parts, designed to equip a complete motorcycle. 3 parts per rim side.   Ready to apply on 17” clean rims.   Width : 6mm

Universal wheel rim tape, solid color. Model set on roller, for a straight stripe laying. Ready to apply on 17” clean rims.   Width : 7 mm Length : 6m

Pair of anodized aluminum bar end plugs, available in several colors. Universal flat model, with a discreet offset.   Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided). These handlebar caps can also be installed on handlebars with an integrated 6mm threaded spot (6 mm screw provided)....

Handle-bars end adaptable on many YAMAHA models.         Available in Black, Red or Blue colour. Sold per pair.           Thread size :  16 x 150 Weight :  67g/piece       Remember to check the inner diameter of your handlebar to ensure that the fixation of the tips is...

Handle-bars end plugs, with logo engraved, adaptable on many YAMAHA models. Available in Black, Red or Blue color.   Thread size  : 16 x 150

Pair of universal  LED  turn signals in plastic with a 3 LED light on the rear side of the turn signals, towards the pilot (white color).

Pair of universal LED turn signals in plastic with 5 SMD  LEDs  on the front, and 3 SMD LEDs on the rear side, both in orange.

Pair of universal  LED  turn signals in plastic, with 17 LED and an orange light.

Adhesive tank pad protection, design MT. For YAMAHA :   MT-125 2014 - 2021 MT01 / MT0S 2005 - 2012 MT03 320 2016 - 2021 MT-03 660 2006 - 2015 <span...

6 parts universal tank pad protection, adaptable on all gas tanks.

OEM gas cap adhesive protection, specific for the following  YAMAHA .   IMPORTANT :  Compare the shape of the models on the pictures with your gas hatch to make sur of a good compatibility. 

Universal mechanical watch, to be installed on all handlebars with an outer diameter of 22 or 25 mm. Check the available space on your handlebars to make sure you can install it. Measures : Outer diameter : 45mm Height (above handle-bars) : 12mm, the rest will be integrated into the handle bars  Battery not included.

Assortment box of insulated electrical crimp connectors - 180 pcs    3 different sizes Red : for cables with a cross-section of up to 1.5mm². Blue : for cables with cross-sections from 1 to 2.5mm². Yellow : for cables with cross-sections from 2.6 to 6mm². <p...

Titanium rear brake pad axle. Suitable for the motorcycle models listed below in the description. INFORMATIONS :  Total Length : 64 mm Thread Length : 9,08 mm Weight : 9,04 g Blue threadlocker tube (243) offered for each set of 2 and 4 axes.

Aftermarket rear brake fluid reservoir kit including the plastic reservoir + the anodized aluminum cap. Universal model. To avoid mistakes, we invite you to check the type of fastening of your original reservoir before ordering. Height: About 45mm Width: ...