Pair of universal  LED  turn signals in plastic, with 17 LED and an orange light.

Universal wheel rim tape, solid color. Model set on roller, for a straight stripe laying. Ready to apply on 17” clean rims.   Width : 7 mm Length : 6m

Universal wheel rim tape. Racing model, pre-cut in 1/3. 12 parts, designed to equip a complete motorcycle. 3 parts per rim side.   Ready to apply on 17” clean rims.   Width : 6mm

Pair of anodized aluminum bar end plugs, available in several colors. Universal bi-color model, with a 10mm long and 18mm diameter offset at the base.   Fits on all handlebars with an internal diameter of  14mm  or  18mm  (adapters provided) or with an integrated  6mm  threaded spot (6 mm screw provided).  Remember to check...

USB plug / charger and universal cigarette lighter socket. Charger with cigarette-lighter socket, output in 12V , and USB plug, output in 5V , sold with its handlebar fastening system. The measurements are displayed in the last picture.

6 parts universal tank pad protection, adaptable on all gas tanks.

Aftermarket brake fluid reservoir kit including the plastic reservoir + the anodized aluminum cap + the anodized aluminum bracket. Fits on almost all motorcycles with a separate brake fluid reservoir from the master cylinder Hose provided, but it is strongly recommended to keep the original one. The supplied one...

Universal USB plug / charger.  Model with USB output in 5V , sold with its handlebar fastening system.    Length of the wires for the connection to your motorcycle battery / wire harness : 110 cm Socket diameter : 27 mm

Pair of anodized aluminum bar end plugs, available in several colors. Universal flat model, with a discreet offset.   Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided). These handlebar caps can also be installed on handlebars with an integrated 6mm threaded spot (6 mm screw provided)....

Pair of universal LED turn signals in plastic with 5 SMD  LEDs  on the front, and 3 SMD LEDs on the rear side, both in orange.

Universal mechanical watch, to be installed on all handlebars with an outer diameter of 22 or 25 mm. Check the available space on your handlebars to make sure you can install it. Measures : Outer diameter : 45mm Height (above handle-bars) : 12mm, the rest will be integrated into the handle bars  Battery not included.

OEM gas cap adhesive protection specific TRIUMPH .   Compare the shape of the models on the pictures with your gas hatch to make sur of a good compatibility.     IMPORTANT : your original gas cap must look like the one below  : <div...

Adhesive tank pad protection, design  Supersport . Designed for many  HONDA , KAWASAKI, SUZUKI, YAMAHA, TRIUMPH..   models.   MEASURES (L x H) :  220mm x 170mm

Box of heat shrink tubings / sleeves made of polyolefin. The kit is composed of 150 pieces. For details, please refer to the table below.

Wheel rim tape with  DAYTONA logo.   Racing model, pre-cut in 1/4, 16 parts designed to make a complete motorcycle. 3 parts per side of the front and rear rims with 8 bonus strips.   Width : about 1 cm.

Assortment box of insulated electrical crimp connectors - 180 pcs    3 different sizes Red : for cables with a cross-section of up to 1.5mm². Blue : for cables with cross-sections from 1 to 2.5mm². Yellow : for cables with cross-sections from 2.6 to 6mm². <p...

Pair of Front flashers covers (right AND left lenses) for many APRILIA / TRIUMPH / MOTO GUZZI / PIAGGIO  models.    You will find the motorcycles compatibility list below.    These glasses are sold alone. Halogen bulbs are NOT included.   If you need lighting, we also offer LED bulbs (orange lighting). They are...

Pair of Rear flashers covers (right AND left lenses) for many APRILIA / TRIUMPH / GILERA / MOTO GUZZI  models.    You will find the motorcycles compatibility list below.    These glasses are sold alone. Halogen bulbs are NOT included.   If you need lighting, we also offer LED bulbs (orange lighting). They are...

Pair of anodised aluminum fork pre load adjusters. Available diameters : 14 mm , 17 mm , 19 mm , 22 mm

3D Adhesive covering film, available in different carbon colors. Suitable for various uses, adaptable to all your projects and at the height of your imagination!    Dimensions per unit (x1): 1.27m x 0.5m and 0.15mm thick.