Universal aluminium license plate holder, adjustable and foldable.

Telephone bracket with steering stem mounting   Efficient claws with rubber buffers Springs for a very good hold Ball joint system for a wide range of position adjustments Aluminium expansion bolt fixing system Possibility to use a GPS   This product remains a UNIVERSAL ...

Holder for phone, GPS / navigation system or radar alarm. Sold as a kit : holding bracket for the phone, with its USB charger + fixing system. Several types of fixing available: - Handlebar mounting bracket (diameter 15 mm) - Screw mounting pad (for screw diameter 8 or 10 mm) All necessary technical information can be found below in the description.

Short clutch lever specific to many KAWASAKI models with cable clutch system. The detailed list of compatibilities per motorcycle and year is available below. If you want a color combination that we don’t suggest (between the main part of the lever and the little 6...

Short brake lever specific to many  KAWASAKI / BUELL  models.  The detailed list of compatibilities per motorcycle and Year is available below. If you want a color combination that we don’t suggest (between the main part of the lever and the little 6 positions dial), you...

Long clutch lever specific to many KAWASAKI models with cable clutch system. The detailed list of compatibilities per motorcycle and year is available below. If you want a color combination that we don’t suggest (between the main part of the lever and the 6 positions...

Long brake lever specific to many  KAWASAKI / BUELL  models. The detailed list of compatibilities per motorcycle and year is available below. If you want a color...

Anodized aluminum brake fluid reservoir with adjustable mounting bracket It fits in the place of any reservoir separate from the master cylinder. Depending on the bike, it will be suitable for the front as well as for the rear, and for the clutch when it is a hydraulic system. Caution , this is an...

Short brake lever specific to many models. The detailed list of compatibilities per motorcycle and year is available below. If you want a color combination we don’t suggest (between the main part of the lever and the little 6 positions dial), you can specify your choice (within the 8...

Automatic tie down strap with ratchet tensioner and its 2 hooks to secure the bike transport.    Measurements and technical information : LENGTH : 18 cm Unwound LENGTH : 1,6 m WIDTH : 2,6 cm FIXATION TYPE : "S" Hooks with rubber protection    Sold by...

Rear-view mirrors block-off plates for many  KAWASAKI  models. You will find the motorcycles compatibility list below.   Distance between the fastening points : 47mm   Sold by pair.

Pair of universal LED turn signals in aluminum. Number of LED on each indicator : 15 Length (out of screw thread) : 36 mm Width / Diameter : 28 mm Screw diameter : 8 mm Wires length : 440 mm NOTE :  Before ordering, just make sure...

Pair of rear (passenger) footrests, aftermarket model based on the OEM, specific many  KAWASAKI  models.  You will find the motorcycles compatibility list below.    Caution  : in some case the provided hardware may not be a perfect match depending on the motorcycle model. If so, you can re-use the hardware...

Half moon handlebar clamp Made In Japan Great brand name products in stock at unbelievable prices, so what's our secret? We can't tell you, but one thing is for sure, stock is limited

Handlebar tie down sling / tie down strap to secure your bike during transport.    Measurements and technical information : LENGTH: 1,94 m WIDTH: 3,8 cm FIXATION TYPE : Carabiner    Complete kit delivered such as shown in the pictures.

Handlebar tie down sling / tie down strap with ratchet.    Measurements and technical information : LENGTH 1 (black tie down strap) : 2,15 m (x2) LENGTH 2 (carabiner / ratchet) : 39 cm WIDTH : 3,8 cm FIXATION TYPE : Carabiner   Complete set delivered by...

Tie down strap for rear wheel, to stabilise your bike during transport.   Measurements and technical information : LENGTH 1 (cerclage de roue) : 66 cm LENGTH 2 (bandes Velcro) : 15 cm WIDTH : 5,0 cm    Sold by unit, such as shown in the pictures. 

Pair of adhesive tank traction pads, to be installed on the flanks of the tank. Specific model for  KAWASAKI  :    NINJA 400 400R 2018 - 2021 These grips are also adapted to the tank of Z400 2019 - 2020 but they will remain with the Ninja logo, as displayed on the photos.

Sport Touring Universal bolt kit : Complement universal bolt kit To know exactly what's in the kit, see photo For road vehicles : supersport / roadster / sport touring / scooter (...) Small kit approx. 60 to 110 parts (depending on model) Description of the parts included in the kit ...

Kit of adhesive tapes for the inner rim (front and rear). Model with RACING logo, designed for 17” rims.    Note : Depending on models, you may need to recut some of the tape, more information available below.