Pair of universal rubber and foam handlebar grips with an internal diameter of  22 mm.   Measures : Length : 115 mm Diameter: 32 mm   Sold by pairs.

Pair of universal heated grips. Suitable for all handlebars with an outer diameter of 22mm (left side) and 24mm (right side).

Pair of riser adjustments for tapered handlebars with a 28mm external diameter at the center. Available in different colours. Anodized machined aluminum risers with a 6-months warranty on anodizing. Total height : 50 mm Mounting bolt diameter : 10 mm

Lever guards made of anodized aluminum. Universal model with fasteners adaptable to all handlebars with an inner diameter of 14 or 18 mm. The length of the protection is adjustable (see photos), and the end tip reclining. Available in different colors. Sold by pairs only.

Aluminium fastening rail, with a square shape.    Measurements and technical information : LENGTH : 50 cm WIDTH : 33.5 mm HEIGHT : 13.2 mm TYPE OF FIXING : BY SCREWS (Not provided) HOLES NUMBER : 6 HOLES DIAMETRE : 6.3 mm DISTANCE BETWEEN THE MOUNTING HOLES : 102 / 77...

Aluminium fastening rail, with a round / semi circular shape.    Measurements and technical information : LENGTH : 50 cm WIDTH : 44 mm HEIGHT : 10 mm TYPE OF FIXING : By Screw (Not provided) HOLES NUMBER : 6 HOLES DIAMETRE : 8 mm DISTANCE BETWEEN THE MOUNTING HOLES : 102 / 77...

Pair of anodised aluminum fork pre load adjusters. Available diameters : 14 mm , 17 mm , 19 mm , 22 mm

Pair of handlebar risers for motorcycles with a 22mm external diameter handlebar. Available in different colours. Anodized machined aluminum risers, with a 6-months warranty on anodizing, hardware included.

Pair of universal risers in anodised machined aluminum, suitable for all motorcycles with a 22 mm diameter handlebar.    Height of the riser  : 19mm     Available in different colors.  Sold by pair. Hardware included.

Pair of front footpegs, same as OEM, specific to many YAMAHA (compatibility list below). CAUTION  :  these foot-pegs will perfectly fit your motorcycle, but in some case the provided hardware may not be a perfect match (depending on the motorcycle model). In which case you can simply re-use the hardware from your past footpegs...

Pair of resistors for LED turn indicators. Sold by pairs. 1 pair of resistors is necessary for 1 pair of LED turn signals (USUALLY enough, although we cannot take responsibility if it is not : on some rare models you may need more than 1 resistor per blinker).  Power : 10W 10 ohm

Pair of resistors for LED turn indicators.   Sold by pairs. 1 pair of resistors is necessary for 1 pair of LED turn signals (USUALLY enough, although we cannot take responsibility if it is not : on some rare models you may need more than 1 resistor per blinker).   Power :  20 W 10 oHm 20 W 15 oHm

Pair of rearview mirrors with integrated LED turn signals. Universal model for all naked motorcycles for which the mirrors fastenings are threaded rods (10mm).   Will require an adapter for the right mirror on YAMAHA motorcycles, and for all motorbikes' models which have a reversed thread fastening mirror. 

Pair of rearview mirrors (left AND right mirror) in anodised aluminum. This round model can install in different manners : bar-end or directly on the handlebar itself. CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars.   Please read the description below to check installation possibilities and advices. Remember to...

Pair of rearview mirrors (left AND right mirror) in anodised aluminum.    This oval  model can install in different manners : bar-end or directly on the handlebar itself.   CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars.   Please read the...

Pair of rearview mirrors (left AND right mirror) in anodised aluminum. This oval  model can install in different manners : bar-end or directly on the handlebar itself. CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars.   Please read the description...

Pair of rearview mirrors (left AND right mirror) in anodised aluminum.    This oval  model can install in different manners : bar-end or directly on the handlebar itself.   CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars.   Please read the...

Pair of rearview mirrors (left AND right mirror) in anodised aluminum.    This oval model can install in different manners : bar-end or directly on the handlebar itself.   CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars.   Please read the description below to check installation possibilities and advices....

Pair of rearview mirrors (left AND right mirror) in anodised aluminum, with small offset and adjustable arms. CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars.   Please read the below description to check installation possibilities and advices. Remember to check the...

Pair of round, bar end rearview mirrors. Two models/designs available (see pictures), one being proposed in fix or foldable version.    These mirrors will adapt on all handlebars with an inner diameter of 14mm or 18mm (fastening adapters included), or threaded with a 8mm diameter (M8).  Remember to check the inner diameter of your...