Front brake disc, model in 290 mm external diameter, specific and adaptable to many  SUZUKI . List of compatibilities per motorcycle models are available below for further information.   MEASUREMENTS: External diameter : 290 mm Internal diameter : 121 mm Thickness : 5 mm Mounting holes :...

License plate light (3 LED).

Aluminum license plate light with 4 LED lights. Flat model, without threaded screws. Sold with 2 screws to install it (mounting at the bottom).   Measures : 56mm x 20 mm  Distance between the two fastening points : 45mm  

Universal booster net, for your helmet or lugguages. Measures : 40 x 40 cm

Flat handlebar in anodised machined aluminum. Universal model.     Outer diameter at end and center : 22,2 mm (often indicated as 22 mm) Inside diameter: 14 mm, not threaded Weight : EXTRA LOW - 535 gr / STREET FIGHTER - 560 gr / MEDIUM - 570 gr     Important:...

Aftermarket brake fluid reservoir kit including the plastic reservoir + the anodized aluminum cap + the anodized aluminum bracket. Fits on almost all motorcycles with a separate brake fluid reservoir from the master cylinder Hose provided, but it is strongly recommended to keep the original one. The supplied one...

Universal wheel rim tape, solid color. Model set on roller, for a straight stripe laying. Ready to apply on 17” clean rims.   Width : 7 mm Length : 6m

Turn signals spacers adapters in plastic, specific for many SUZUKI models.     1 set of 4 spacers adapters is necessary for 1 pair of turn signals (2 adapters per turn indicator)  

Pair of anodized aluminum bar end plugs, available in several colors. Universal model with a covering plastic cap.   Fits on all handlebars with an internal diameter of  14mm  or  18mm  (adapters provided). These handlebar caps can also be installed on handlebars with an integrated  6mm  threaded spot (6 mm screw provided)....

Pair of anodized aluminum bar end plugs, available in several colors. Universal flat model, with a discreet offset.   Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided). These handlebar caps can also be installed on handlebars with an integrated 6mm threaded spot (6 mm screw provided)....

Anodised universal valve caps, different colors available. Sold by pairs.

Universal valve caps for all motorcycles and scooters. Grenade shape. Sold by pair.

Pair of universal  LED  turn signals in aluminum.  E8 E-marked  model, with  an orange light. All the universal turn signals models we propose are visible on the last photo!

Pair of universal  LED  turn signals in plastic with orange lighting and a blinking indicator on the rear of the turn signals, towards the pilot (blinking on both sides).

Pair of universal LED turn signals in plastic with 5 SMD  LEDs  on the front, and 3 SMD LEDs on the rear side, both in orange.

Pair of universal LED turn signals in aluminum. E8 E-marked model, with 9 LED and an orange light.

Pair of universal  LED  turn signals in plastic.  E8 E-marked  model, with 15 LED and an orange light. Design with a center hole. For installation on MT07 / FZ07, you must install and reverse a  turn signal shutter  so the nut can be screwed on the turn signal's rod. 

Pair of license plate LED lights. Mounted on a M5 integrated threaded screw (diameter 5 mm) for a direct and discreet installation on the license plate holder.   Sold by pair only.

Pair of universal  LED  turn signals in plastic, with 17 LED and an orange light.

Pair of universal rubber and anodised aluminum handlebar grips with an internal diameter of  22 mm  on the left side (clutch) and  24 mm  on the right side (throttle).   Measures : Length: 120 mm Depth: Hollow...