Front LED headlight. Round adaptable model. Measures :
Diameter : 7 inch (17,78 cm)
Profondeur : 3,74 inch (9,5 cm)
LED bulbs included in the font light, 3 pins connector similar to H4 ones that can be found on nearly all round headlights equipped naked motorbikes.
Front LED headlight. Round adaptable model. Measures :
Diameter : 7 inch (17,78 cm)
Profondeur : 3,74 inch (9,5 cm)
LED bulbs included in the font light, 3 pins connector similar to H4 ones that can be found on nearly all round headlights equipped naked motorbikes.
Mounting bracket and adaptor for rearview mirrors, universal model for all handlebars with a 22mm external diameter.
Available with 8 mm or 10 mm screw thread (M8 or M10), in normal / classic thread (not inverted).
Sold per unit. ...
Mounting bracket and adaptor for rearview mirrors, universal model for all handlebars with a 22mm external diameter.
Available with 8 mm or 10 mm screw thread (M8 or M10), in normal / classic thread (not inverted).
Sold per unit. ...
Pair of universal rubber and anodised aluminum handlebar grips with an internal diameter of 22 mm on the left side (clutch) and 24 mm on the right side (throttle).
Measures :
Length: 120 mm
Depth: Hollow...
Pair of universal rubber and anodised aluminum handlebar grips with an internal diameter of 22 mm on the left side (clutch) and 24 mm on the right side (throttle).
Measures :
Length: 120 mm
Depth: Hollow...
Pair of universal LED turn signals in plastic with orange lighting and a blinking indicator on the rear of the turn signals, towards the pilot (blinking on both sides).
Pair of universal LED turn signals in plastic with orange lighting and a blinking indicator on the rear of the turn signals, towards the pilot (blinking on both sides).
Pair of universal LED turn signals in aluminum. E8 E-marked model, with an orange light.
All the universal turn signals models we propose are visible on the last photo!
Pair of universal LED turn signals in aluminum. E8 E-marked model, with an orange light.
All the universal turn signals models we propose are visible on the last photo!
Pair of universal LED turn signals in plastic. E8 E-marked model, with 15 LED and an orange light. Design with a center hole.
For installation on MT07 / FZ07, you must install and reverse a turn signal shutter so the nut can be screwed on the turn signal's rod.
Pair of universal LED turn signals in plastic. E8 E-marked model, with 15 LED and an orange light. Design with a center hole.
For installation on MT07 / FZ07, you must install and reverse a turn signal shutter so the nut can be screwed on the turn signal's rod.
M6 Screw covers in anodized aluminium, available in different colours. Designed for screws with a 5 mm BTR (or Hex key) head.
SOLD BY 4, 6, 12 and 20 pieces.
M6 Screw covers in anodized aluminium, available in different colours. Designed for screws with a 5 mm BTR (or Hex key) head.
SOLD BY 4, 6, 12 and 20 pieces.
Pair of resistors for LED turn indicators.
Sold by pairs. 1 pair of resistors is necessary for 1 pair of LED turn signals (USUALLY enough, although we cannot take responsibility if it is not : on some rare models you may need more than 1 resistor per blinker).
Power : 10W 10 ohm
Pair of resistors for LED turn indicators.
Sold by pairs. 1 pair of resistors is necessary for 1 pair of LED turn signals (USUALLY enough, although we cannot take responsibility if it is not : on some rare models you may need more than 1 resistor per blinker).
Power : 10W 10 ohm
Aftermarket brake fluid reservoir kit including the plastic reservoir + the anodized aluminum cap + the anodized aluminum bracket.
Fits on almost all motorcycles with a separate brake fluid reservoir from the master cylinder
Hose provided, but it is strongly recommended to keep the original one. The supplied one...
Aftermarket brake fluid reservoir kit including the plastic reservoir + the anodized aluminum cap + the anodized aluminum bracket.
Fits on almost all motorcycles with a separate brake fluid reservoir from the master cylinder
Hose provided, but it is strongly recommended to keep the original one. The supplied one...
Anodized aluminum brake fluid reservoir with adjustable mounting bracket
It fits in the place of any reservoir separate from the master cylinder. Depending on the bike, it will be suitable for the front as well as for the rear, and for the clutch when it is a hydraulic system.
Caution , this is an...
Anodized aluminum brake fluid reservoir with adjustable mounting bracket
It fits in the place of any reservoir separate from the master cylinder. Depending on the bike, it will be suitable for the front as well as for the rear, and for the clutch when it is a hydraulic system.
Caution , this is an...