Flat handlebar in anodised machined aluminum. Universal model.    Outer diameter at the handlebar’s end: 22,2 mm Outer diameter in the center of the handlebar: 28,6mm (often indicated as 28 mm) Inside diameter: 14 mm, not threaded Weight : 630 gr    <p...

Pair of rearview mirrors with integrated LED turn signals. Universal model for all naked motorcycles for which the mirrors fastenings are threaded rods (10mm).   Will require an adapter for the right mirror on YAMAHA motorcycles, and for all motorbikes' models which have a reversed thread fastening mirror. 

Quick release (1/4 turn) gas cap in anodised aluminum, specific for tmany TRIUMPH  models (complete compatibility list available below).   Sold with a spare seal and the necessary hardware.     IMPORTANT : your original gas cap must look like the one below...

Front foot-pegs for many  TRIUMPH  models. You will find the motorcycles compatibility list below.    The foot rests are sold by pair (left AND right footrest) with specific fastenings in order to be installed without any modification on the motorcycle models indicated in the listing.   Good to know...

Rear foot-pegs for many  TRIUMPH  models. You will find the motorcycles compatibility list below.    The foot rests are sold by pair (left AND right footrest) with specific fastenings in order to be installed without any modification on the motorcycle models indicated in the listing.   Good to know...

Pair of universal risers in anodised machined aluminum, suitable for all motorcycles with a 28 mm diameter handlebar.      Height of the riser :  25  mm Offset : 20 mm        Sold by pair. Hardware included.

Pair of rearview mirrors (left AND right mirrors) in machined anodised aluminum and in plastic. Sold per unit or by pair, different colors available, necessary hardware included. Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed...

Lever guards made of anodized aluminum. Universal model with fasteners adaptable to all handlebars with an inner diameter of 14 or 18 mm. The length of the protection is adjustable (see photos), and the end tip reclining. Available in different colors. Sold by pairs only.

Box composed of 173 elements, including 63 screws in anodized aluminum, of different sizes. Torx screws, also called star-shaped or star screws, more resilient than conventional hex or Allen screws sockets.   Kit available with or without fairings fastening plastic clips.

Front foot-pegs for many  TRIUMPH  models. You will find the motorcycles compatibility list below.    The foot rests are sold by pair (left AND right footrest) with specific fastenings in order to be installed without any modification on the motorcycle models indicated in the listing.   Good to know...

Universal steel license plate holder, adjustable and foldable.

Set of High end CO₂ inflator with manual pump and CO₂ cartridges: 1 replacement CO₂ release head 8001  10 x 12GR + 1 x 16GR CO₂ cartridges The ultimate accessory against deflated tyres. Running out of CO₂? The inflator also acts as a manual pump!

Adjustable / Foldable (also called Flip-Up) clutch lever specific to many TRIUMPH  models. The detailed list of compatibilities per motorcycle and year is available below. If you want a color combination we don’t suggest (between main part of the lever, 6 positions dial and adjustable part), specify your...

Adjustable / Foldable (Flip-Up) brake lever specific to many more. Detailed list of compatibilities per motorcycle and year available below. If you want a color combination we don’t suggest (main part of the lever, 6 positions dial and adjustable part), specify your choice within the 8 available colors in the comments before you finalize the...

Full pack containing :   - An universal adjustable and foldable license plate holder - license plate lighting 3 LEDs (REF EDP1)

Pair of round, bar end rearview mirrors. Two models/designs available (see pictures), one being proposed in fix or foldable version.    These mirrors will adapt on all handlebars with an inner diameter of 14mm or 18mm (fastening adapters included), or threaded with a 8mm diameter (M8).  Remember to check the inner diameter of your...

Pair of rearview mirrors (left AND right mirror) in anodised aluminum and plastic. Black color, with a colored ring on the mirror’s arm (different colors available). Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale on...

Pair of riser adjustments for tapered handlebars with a 28mm external diameter at the center. Available in different colours. Anodized machined aluminum risers with a 6-months warranty on anodizing. Total height : 50 mm Mounting bolt diameter : 10 mm