Specific hardware kit for   KAWASAKI  :    Z 1000 2014 - 2016 Z-1000 / Z1000 R 2017 - 2020    The photos are not contractual, they only show an example of the contents of a screw kit.  Please refer to...

Pair of rearview mirrors (left AND right mirrors) in machined and anodised aluminum. Different colors available, hardware kit provided. Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale on our store).

Kit of raising clip ons clamps + handlebar tubes  (right AND left clip ons) designed for 50mm diameter forks, consisting of a pair of clamps and a pair of anodised CNC aluminum tubes.    MEASUREMENTS (CLAMPS)  : Riser height : 35 mm Clamp width: 31,9 mm Clamp total height :...

Steel Wheel block / Paddock wheel chock for motorbike. To be installed on a trailer, in a Van, on a lifting platform, etc…   Suitable for all the front wheels from 15 to 21 inches.   Sold such as shown in the pictures.

Pair of rearview mirrors (left AND right mirror) in anodised aluminum.    This oval model can install in different manners : bar-end or directly on the handlebar itself.   CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars.   Please read the description below to check installation possibilities and advices....

Quick release petrol cap with key, specific to many KAWASAKI . Machined aluminium gas cap Anodised for a better finish Quick release cap by pressing Secure thanks to the special key required to open it Choice of colours for the central cap Hard plastic key  Supplied with key ...

Performance Friction “Carbon Metallic” brake pad set (PFC Brakes).    1 unit corresponds to 1 set of pads for 1 calliper.    See list of compatible models at the bottom of the description (pad form also available in photos)    Suitable for : Front callipers

CNC Aluminium license plate holder, specific to the following models for   KAWASAKI  :     <td...

Pair of frame sliders or crash pads, in CNC anodized aluminium, specific to the following KAWASAKI  :     Z-1000    2010 - 2013 Z 1000    2014 - 2021 Z1000 R  2017 - 2021   ...

Rear Sprocket RENTHAL Ultra Light Made In England Photo as an example, list of the compatibilities under the description. Any product that has been opened, assembled or has traces of handling cannot be returned, exchanged or refunded. Top brand products in stock at incredible prices, so what's the secret? We can't tell you, but one...

Pair of clip on handlebars (right AND left clip ons) designed for 50mm diameter forks, consisting of a pair of clamps and a pair of anodized CNC aluminum tubes.    Dimensions: Length of the tubes: 30 cm Outside diameter of the tubes: 22 mm Tube’s inner diameter : 16mm Angle of...

Polycarbonate Windscreen, double curvature, specific for the following  KAWASAKI :    <td style="border:1px solid...

Cable clutch perch, High End model in anodised aluminum. Universal for all the motorcycles equipped with a cable clutch. Will fit on all handlebars with a 22mm outer diameter. Sold with an anodised lever, to be selected among : - A short or long clutch lever (no additive cost) - Adjustable in length and foldable in case of a fall (+10€ additive...

Stainless steel radiator guard, with Z logo, specific for the following KAWASAKI . (List of compatibilities per motorcycle models are available below for further information.)    Fits on the original radiator without modification Protection against impacts and gravel

Pair of exhaust muffler AVDB brackets made in powder-coated steel, specific for the following KAWASAKI models :        <tr...

AVDB by Jealou'S" Water radiator guard , specific for the OEM radiators of the following KAWASAKI  models :    <table cellspacing="0" cellpadding="0" dir="ltr" border="1"...

Flat handlebar in anodised machined aluminum. Universal model.    Outer diameter at the handlebar’s end: 22,2 mm Outer diameter in the center of the handlebar: 28,6mm (often indicated as 28 mm) Inside diameter: 14 mm, not threaded Weight : 630 gr    <p...

Pair of rearview mirrors with integrated LED turn signals. Universal model for all naked motorcycles for which the mirrors fastenings are threaded rods (10mm).   Will require an adapter for the right mirror on YAMAHA motorcycles, and for all motorbikes' models which have a reversed thread fastening mirror. 

Rear foot-pegs for many  KAWASAKI  models. You will find the motorcycles compatibility list below.    The foot rests are sold by pair (left AND right footrest) with specific fastenings in order to be installed without any modification on the motorcycle models indicated in the listing.   Good to know...

Front foot-pegs for many  KAWASAKI  models. You will find the motorcycles compatibility list below.    The foot rests are sold by pair (left AND right footrest) with specific fastenings in order to be installed without any modification on the motorcycle models indicated in the listing.   Good to know...