Universal wheel rim tape, solid color. Model set on roller, for a straight stripe laying. Ready to apply on 17” clean rims.   Width : 7 mm Length : 6m

Pair of anodized aluminum bar end plugs, available in several colors. Universal bi-color model, with a 10mm long and 18mm diameter offset at the base.   Fits on all handlebars with an internal diameter of  14mm  or  18mm  (adapters provided) or with an integrated  6mm  threaded spot (6 mm screw provided).  Remember to check...

Pair of anodized aluminum bar end plugs, available in several colors. Universal flat model, with a discreet offset.   Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided). These handlebar caps can also be installed on handlebars with an integrated 6mm threaded spot (6 mm screw provided)....

Universal USB plug / charger.  Model with USB output in 5V , sold with its handlebar fastening system.    Length of the wires for the connection to your motorcycle battery / wire harness : 110 cm Socket diameter : 27 mm

Universal mechanical watch, to be installed on all handlebars with an outer diameter of 22 or 25 mm. Check the available space on your handlebars to make sure you can install it. Measures : Outer diameter : 45mm Height (above handle-bars) : 12mm, the rest will be integrated into the handle bars  Battery not included.

Box of heat shrink tubings / sleeves made of polyolefin. The kit is composed of 150 pieces. For details, please refer to the table below.

Assortment box of insulated electrical crimp connectors - 180 pcs    3 different sizes Red : for cables with a cross-section of up to 1.5mm². Blue : for cables with cross-sections from 1 to 2.5mm². Yellow : for cables with cross-sections from 2.6 to 6mm². <p...

Titanium rear brake pad axle. Suitable for the motorcycle models listed below in the description. INFORMATIONS :  Total Length : 64 mm Thread Length : 9,08 mm Weight : 9,04 g Blue threadlocker tube (243) offered for each set of 2 and 4 axes.

Aftermarket rear brake fluid reservoir kit including the plastic reservoir + the anodized aluminum cap. Universal model. To avoid mistakes, we invite you to check the type of fastening of your original reservoir before ordering. Height: About 45mm Width: ...

Multi-position hinged brake fluid reservoir bracket in anodized aluminum.

3D Adhesive covering film, available in different carbon colors. Suitable for various uses, adaptable to all your projects and at the height of your imagination!    Dimensions per unit (x1): 1.27m x 0.5m and 0.15mm thick.

Pair of anodised aluminum fork pre load adjusters. Available diameters : 14 mm , 17 mm , 19 mm , 22 mm

Motorbike tubular and universal insurance slip or tax disc. Length of the tube : 6 cm Diameter : 2.3 cm Diameter of the mounting hole : 0.8 cm

Motorbike insurance slip or tax disc Hexagonal shape holder. Available in different colors, measures displayed on the last photos.

Handlebar tie down sling / tie down strap to secure your bike during transport.    Measurements and technical information : LENGTH: 89 cm WIDTH: 4,5 cm    Sold by unit, such as shown in the pictures.

Small universal toolbox to be stowed (ideally) under the seat of your motorcycle. Ideal for emergency use.  Delivered as shown on the photos.

Universal ABS plastic front fender extension to be adapted. Protects spark plugs from splashing water Protects engine crankcases and radiators from gravel projections Quick and easy to fit thanks to the mounting holes Hardware included Need to drill the mudguard before mounting Prevent breakdowns and...

Universal klaxon available in 2 power levels. This 12V horn can be adapted to all 2-wheelers and ATV.

License plate light (3 LED).

Aluminum license plate light with 4 LED lights. Flat model, without threaded screws. Sold with 2 screws to install it (mounting at the bottom).   Measures : 56mm x 20 mm  Distance between the two fastening points : 45mm