USB plug / charger and universal cigarette lighter socket. Charger with cigarette-lighter socket, output in 12V , and USB plug, output in 5V , sold with its handlebar fastening system. The measurements are displayed in the last picture.

6 parts universal tank pad protection, adaptable on all gas tanks.

Aftermarket brake fluid reservoir kit including the plastic reservoir + the anodized aluminum cap + the anodized aluminum bracket. Fits on almost all motorcycles with a separate brake fluid reservoir from the master cylinder Hose provided, but it is strongly recommended to keep the original one. The supplied one...

Universal USB plug / charger.  Model with USB output in 5V , sold with its handlebar fastening system.    Length of the wires for the connection to your motorcycle battery / wire harness : 110 cm Socket diameter : 27 mm

Universal cable clutch perch, sold with its aftermarket clutch lever. Adaptation guaranteed on all handlebars with an outer diameter of 22mm. 

Pair of anodized aluminum bar end plugs, available in several colors. Universal flat model, with a discreet offset.   Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided). These handlebar caps can also be installed on handlebars with an integrated 6mm threaded spot (6 mm screw provided)....

Pair of universal LED turn signals in plastic with 5 SMD  LEDs  on the front, and 3 SMD LEDs on the rear side, both in orange.

Universal mechanical watch, to be installed on all handlebars with an outer diameter of 22 or 25 mm. Check the available space on your handlebars to make sure you can install it. Measures : Outer diameter : 45mm Height (above handle-bars) : 12mm, the rest will be integrated into the handle bars  Battery not included.

OEM gas cap adhesive protection, specific for the following HONDA.   Compare the shape of the models on the pictures with your gas hatch to make sur of a good compatibility.       IMPORTANT : your original gas cap must look like the one below  : <div...

Pair of flush-mount indicators (left AND right) for   HONDA  :     CBR 600RR 2003 - 2016 and 1000RR 2004 - 2007 Screw-in model, mounted on a threaded screw and provided with a retaining nut for a direct integration in place of your original turn...

Wheel rim tape with HORNET   logo.   Racing model, pre-cut in 1/4, 16 parts designed to make a complete motorcycle. 3 parts per side of the front and rear rims with 8 bonus strips.   Width : about 1 cm.

Wheel rim tape with CB   logo.   Racing model, pre-cut in 1/4, 16 parts designed to make a complete motorcycle. 3 parts per side of the front and rear rims with 8 bonus strips.   Width : about 1 cm.

Pair of front flashers covers (right AND left lenses) for many  HONDA  models.    You will find the motorcycles compatibility list below.    These glasses are sold alone. Halogen bulbs are NOT included.   If you need lighting, we also offer LED bulbs (orange lighting). They are proposed with the direct link...

Pair of Rear flashers covers (right AND left lenses) for many  HONDA  models.    You will find the motorcycles compatibility list below.    These glasses are sold alone. Halogen bulbs are NOT included.   If you need lighting, we also offer LED bulbs (orange lighting). They are proposed with the direct link...

Adhesive tank pad protection, design  Hornet . Designed for many  HONDA models :    Hornet CB 600 F 1998 - 2002 Hornet CB600S 2000 - 2003 Hornet CB600F 2003 - 2004 Hornet CB600 F 2005 - 2006 Hornet CB 600F 2007 - 2010 Hornet CB600F 2011 - 2014 Hornet CB900F 2002 - 2006 Hornet 250 1996 - 2007 ...

Box of heat shrink tubings / sleeves made of polyolefin. The kit is composed of 150 pieces. For details, please refer to the table below.

Assortment box of insulated electrical crimp connectors - 180 pcs    3 different sizes Red : for cables with a cross-section of up to 1.5mm². Blue : for cables with cross-sections from 1 to 2.5mm². Yellow : for cables with cross-sections from 2.6 to 6mm². <p...

Specific reinforced clutch spring kit HONDA SUZUKI TRIUMPH Reinforced springs +15% more strength Plug and play mounting For extreme use Improved gear shifting Compatibility list available after the description. Made in England. Quantity: 6

Specific starter motor brush  HONDA / YAMAHA / KAWASAKI / SUZUKI: Compatibility list available after the description. Made in Japan. <ul...

3D Adhesive covering film, available in different carbon colors. Suitable for various uses, adaptable to all your projects and at the height of your imagination!    Dimensions per unit (x1): 1.27m x 0.5m and 0.15mm thick.