Frame cap kit universal.     Made of hard plastic Fits into the holes in the frame where the engine mounting screws are located Protects screws and bolts from moisture and corrosion Provides a neater finish Various diameters

Short clutch lever specific to many HONDA  models. The detailed list of compatibilities per motorcycle and year is available below. If you want a color combination...

Short brake lever specific to many HONDA , YAMAHA, KAWASAKI, BENELLI, KYMCO and KEEWAY models. The detailed list of compatibilities per motorcycle and year is available below If you want a color combination we don’t suggest (between main part of the lever and the 6 positions dial), you can...

Long clutch lever specific to some  HONDA   models. The detailed list of compatibilities per motorcycle and year is available below. <span lang="en-us"...

Adjustable / Foldable (also called Flip-Up) clutch lever specific to many HONDA models. The detailed list of compatibilities per motorcycle and year is available below. If you want a color combination we don’t suggest (between main part of the lever, 6 positions dial and adjustable part), specify your...

Adjustable / Foldable (Flip-Up) brake lever specific to many  models. Detailed list of compatibilities per motorcycle and year below. If you want a color combination we don’t suggest (main part of the lever, 6 positions dial and adjustable part),...

Long brake lever specific to many models. The detailed list of compatibilities per motorcycle and year is available below. If you want a color combination we don’t suggest (between main part of the lever and 6 positions dial), you can specify your choice within the 8 available colors in...

Handlebar tie-down clamps.    Measurements and technical information : LENGTH : 11 cm WIDTH : 6,8 cm Hole DIAMETER (to pass the strap through) : 2,15 cm    Sold by pair, such as shown in the pictures.

Self-retracting ratchet strap and its 2 "S" shaped hooks. Measurements and technical information : LENGTH 1 : 5,0 m LENGTH 2 (partie avec cliquet) : 37 cm WIDTH : 2,5 cm FIXATION TYPE : "S" Shaped hooks with rubber protection      Sold by pair, such as shown in the pictures.

Automatic tie down strap with ratchet tensioner and its 2 hooks to secure the bike transport.    Measurements and technical information : LENGTH : 18 cm Unwound LENGTH : 1,6 m WIDTH : 2,6 cm FIXATION TYPE : "S" Hooks with rubber protection    Sold by...

Universal hydraulic steering damper to be adapted, sold alone exactly as shown in the pictures.     For more safety in everyday life and on the track With fastening ring Transverse mounting

Universal Oil draining and stocking pan.   LENGTH : 60 cm WIDTH : 33 cm THICKNESS : 10,5 cm JERRYCAN CAPACITY : 8 Liters INPUT DIAMETER : 2,75 cm OUTPUT DIAMETER : 3,8 cm    Sold per unit, as displayed on pictures. 

Universel overflow collector, suitable for most motorbikes.    LENGTH : 132 mm WIDTH : 80 mm THICKNESS : 48 mm JERRYCAN CAPACITY : 250 ml INPUT DIAMETER : 8 mm OUTPUT DIAMETER : 15 mm TIE DOWN LENGTH : 390 mm HOSE : 8 mm x 2000 mm    Sold as shown on the...

Steel Wheel block / Paddock wheel chock for motorbike. To be installed on a trailer, in a Van, on a lifting platform, etc…   Suitable for all the front wheels from 15 to 21 inches.   Sold such as shown in the pictures.

Anodized aluminum brake fluid reservoir with adjustable mounting bracket It fits in the place of any reservoir separate from the master cylinder. Depending on the bike, it will be suitable for the front as well as for the rear, and for the clutch when it is a hydraulic system. Caution , this is an...

Aftermarket rear brake fluid reservoir kit including the plastic reservoir + the anodized aluminum cap. Universal model. To avoid mistakes, we invite you to check the type of fastening of your original reservoir before ordering. Height: About 45mm Width: ...

Assortment box of insulated electrical crimp connectors - 180 pcs    3 different sizes Red : for cables with a cross-section of up to 1.5mm². Blue : for cables with cross-sections from 1 to 2.5mm². Yellow : for cables with cross-sections from 2.6 to 6mm². <p...

Coolant Radiator Cap, different pressure settings, for 0.9 to 2 bar. Fast plug and play assembly Replaces your original cap without modification Fixation by ¼ turn Different pressure calibrations depending on your bike or use Resistant to the following pressure : 0.9 / 1.1 / 1.3 / 1.6 / 1.8 / 2 bar Very...

Brake master cylinder / Clutch perch bar clamp, universal model to be adapted on a majority of motorcycle models on the market (22mm).   Available in 6 different colors. Sold per unit.