Protection slider for front fork specific to the following HONDA  :   Hornet 900 2002 - 2006 Hornet 600 / CB 599 2005 - 2006 Hornet 600  / CB 599 2007 - 2010 Hornet 600 / CB 599  2011 - 2012 CBR 600 F 2011 - 2014   Note ...

Pair of rear (passenger) footrests, aftermarket model based on the OEM, specific many  HONDA  models.  You will find the motorcycles compatibility list below. If the fastening system is not provided or if the one you received is not...

Automatic tie down strap with ratchet tensioner and its 2 hooks to secure the bike transport.    Measurements and technical information : LENGTH : 18 cm Unwound LENGTH : 1,6 m WIDTH : 2,6 cm FIXATION TYPE : "S" Hooks with rubber protection    Sold by...

Pair of front OEM type turn signals specific for many HONDA (complete list at the bottom of the description).    Sold by pair, as shown on the pictures. Depending on the models, the turn-signals can be available with different glass colors and type of lighting (Halogen bulbs or LED).   About the MODEL Halogen Bulb - Design 2 et 3 (3 wires) :...

Pair of rear OEM type turn signals specific for many  HONDA  (complete list at the bottom of the description).    Sold by pair, as shown on the pictures. Depending on the models, the turn-signals can be available with different glass colors and type of lighting (Halogen bulbs or LED).   About the MODEL Halogen Bulb - Design 2 et 3 (3 wires)...

Front Sprocket RENTHAL Made In England The front sprocket has a width of 520. List of the compatibilities under the description. Any product that has been opened, assembled or has traces of handling cannot be returned, exchanged or refunded. Top brand products in stock at incredible prices, so what's the secret? We can't...

Protection slider for front fork specific to the following HONDA  :    <tr...

Pair of universal  LED  turn signals in aluminum and an orange lighting.  Number of LED on each turn signal : 17 Length (out of screw thread) : 86 mm Width : 38 mm Screw diameter : 8 mm Wires length : 210 mm

Pair of universal  LED  turn signals in aluminum.  E8 E-marked  model, with  an orange light. All the universal turn signals models we propose are visible on the last photo!

Pair of universal  LED  turn signals in plastic with orange lighting and a blinking indicator on the rear of the turn signals, towards the pilot (blinking on both sides).

Pair of universal  LED  turn signals in plastic with 8 LEDs and an orange light.

Pair of universal rubber and anodised aluminum handlebar grips with an internal diameter of  22 mm  on the left side (clutch) and  24 mm  on the right side (throttle).   Measures : Length: 120 mm Depth: Hollow...

Pair of universal  LED  turn signals in plastic.  E8 E-marked  model, with 15 LED and an orange light. Design with a center hole. For installation on MT07 / FZ07, you must install and reverse a  turn signal shutter  so the nut can be screwed on the turn signal's rod. 

Pair of universal  LED  turn signals in aluminum. New model with 1 powerful LED light, orange color.

Pair of universal LED turn signals in aluminum. E8 E-marked model, with 9 LED and an orange light.

Pair of anodized aluminum bar end plugs, available in several colors. Universal model with a covering plastic cap.   Fits on all handlebars with an internal diameter of  14mm  or  18mm  (adapters provided). These handlebar caps can also be installed on handlebars with an integrated  6mm  threaded spot (6 mm screw provided)....

Secondary LED light, universal model with a mounting bracket designed to fit on all handlebars with an external diameter of 22 or 28 mm. Very good lighting quality, white light color. 3200 Lumens Sold per unit.

Pair of swing arm spools in anodised aluminum, adaptable on all the swing arms with a M8 fastening thread, for example :  Honda, Kawasaki, Triumph, Suzuki, Ducati ...

Pair of universal rubber and anodised aluminum handlebar grips with an internal diameter of  22 mm  on the left side (clutch) and  24 mm  on the right side (throttle).   Measures : Length: 120 mm (+ 13 mm with end caps) Depth:...

Kit of adhesive tapes for the inner rim (front and rear). Model with RACING logo, designed for 17” rims.    Note : Depending on models, you may need to recut some of the tape, more information available below.