Pair of universal  LED  turn signals in aluminum and an orange lighting.  Number of LED on each turn signal : 17 Length (out of screw thread) : 86 mm Width : 38 mm Screw diameter : 8 mm Wires length : 210 mm

Pair of universal  LED  turn signals in aluminum.  E8 E-marked  model, with  an orange light. All the universal turn signals models we propose are visible on the last photo!

Pair of universal  LED  turn signals in plastic with orange lighting and a blinking indicator on the rear of the turn signals, towards the pilot (blinking on both sides).

Pair of universal  LED  turn signals in plastic with 8 LEDs and an orange light.

Pair of universal rubber and anodised aluminum handlebar grips with an internal diameter of  22 mm  on the left side (clutch) and  24 mm  on the right side (throttle).   Measures : Length: 120 mm Depth: Hollow...

Pair of universal  LED  turn signals in plastic.  E8 E-marked  model, with 15 LED and an orange light. Design with a center hole. For installation on MT07 / FZ07, you must install and reverse a  turn signal shutter  so the nut can be screwed on the turn signal's rod. 

Pair of universal  LED  turn signals in aluminum. New model with 1 powerful LED light, orange color.

Pair of universal LED turn signals in aluminum. E8 E-marked model, with 9 LED and an orange light.

Pair of anodized aluminum bar end plugs, available in several colors. Universal model with a covering plastic cap.   Fits on all handlebars with an internal diameter of  14mm  or  18mm  (adapters provided). These handlebar caps can also be installed on handlebars with an integrated  6mm  threaded spot (6 mm screw provided)....

Secondary LED light, universal model with a mounting bracket designed to fit on all handlebars with an external diameter of 22 or 28 mm. Very good lighting quality, white light color. 3200 Lumens Sold per unit.

Pair of universal rubber and anodised aluminum handlebar grips with an internal diameter of  22 mm  on the left side (clutch) and  24 mm  on the right side (throttle).   Measures : Length: 120 mm (+ 13 mm with end caps) Depth:...

Kit of adhesive tapes for the inner rim (front and rear). Model with RACING logo, designed for 17” rims.    Note : Depending on models, you may need to recut some of the tape, more information available below.

Kit of adhesive tapes for the inner rim (front and rear). Model with  CB 650  logo, designed for 17” rims.   Note  : Depending on models, you may need to recut some of the tape, more information available below.

Pair of universal LED turn signals in plastic. E8 E-marked model, with 8 SMD LEDs on the front, and 2 SMD LEDs on the rear side, both in orange.

Pair of universal LED turn signals. E8 E-marked model, with 3 LED and an orange light.

Steering stem nut for many HONDA models. You will find the motorcycles compatibility list below.    Technical informations : Nut : M24x1 Necessary tools for installation : 31 wrench key Depth of the threaded part : 11 mm Maximum depth of the nut : 14 mm ...

Front Brake fluid reservoir cap for many  HONDA models and some  MASH . You will find the motorcycles compatibility list below.

Pair of flush-mount indicators (left AND right) for HONDA  CBR 600 F4 1999-2000, FS from 2001 to 2002, and F from 2002 to 2005. Will also fit on other HONDA models, produced between 1999 and 2015. Double-sided tape model, for a direct integration in place of your...

Pair of anodized aluminum bar end plugs UNIK by Avdb . Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided). These handlebar caps can also be installed on handlebars with an integrated   6mm threaded spot (6 mm screw provided).    Sold with the fastening system for an easy installation on HONDA OEM...

Pair of universal rubber and anodised aluminum handlebar grips with an internal diameter of 22 mm on the left side (clutch) and 24 mm on the right side (throttle).   Measures : Length: 123 mm   Sold by pairs.