Handlebar tie-down clamps.    Measurements and technical information : LENGTH : 11 cm WIDTH : 6,8 cm Hole DIAMETER (to pass the strap through) : 2,15 cm    Sold by pair, such as shown in the pictures.

Pack of 10 M6 DRC Aluminium Spacers Type 31 Made In Japan Great brand name products in stock at unbelievable prices, so what's our secret? We can't tell you, but one thing is for sure, stock is limited.

M20x1,5  oil filler cap for many SUZUKI models. You will find the motorcycles compatibility list below.

Universal Oil draining and stocking pan.   LENGTH : 60 cm WIDTH : 33 cm THICKNESS : 10,5 cm JERRYCAN CAPACITY : 8 Liters INPUT DIAMETER : 2,75 cm OUTPUT DIAMETER : 3,8 cm    Sold per unit, as displayed on pictures. 

Self-retracting ratchet strap and its 2 "S" shaped hooks. Measurements and technical information : LENGTH 1 : 5,0 m LENGTH 2 (partie avec cliquet) : 37 cm WIDTH : 2,5 cm FIXATION TYPE : "S" Shaped hooks with rubber protection      Sold by pair, such as shown in the pictures.

Universel overflow collector, suitable for most motorbikes.    LENGTH : 132 mm WIDTH : 80 mm THICKNESS : 48 mm JERRYCAN CAPACITY : 250 ml INPUT DIAMETER : 8 mm OUTPUT DIAMETER : 15 mm TIE DOWN LENGTH : 390 mm HOSE : 8 mm x 2000 mm    Sold as shown on the...

Sensor / probe adaptable, specific model for many SUZUKI (complete list at the bottom of the description).    OEM Reference:  1365049X00 / 1365057F00 / 1365010G00   Sold per unit and send as displayed on pictures.

Universal wheel rim tape, solid color. Model set on roller, for a straight stripe laying. Ready to apply on 17” clean rims.   Width : 7 mm Length : 6m

Pair of anodized aluminum bar end plugs, available in several colors. Universal bi-color model, with a 10mm long and 18mm diameter offset at the base.   Fits on all handlebars with an internal diameter of  14mm  or  18mm  (adapters provided) or with an integrated  6mm  threaded spot (6 mm screw provided).  Remember to check...

USB plug / charger and universal cigarette lighter socket. Charger with cigarette-lighter socket, output in 12V , and USB plug, output in 5V , sold with its handlebar fastening system. The measurements are displayed in the last picture.

Aftermarket brake fluid reservoir kit including the plastic reservoir + the anodized aluminum cap + the anodized aluminum bracket. Fits on almost all motorcycles with a separate brake fluid reservoir from the master cylinder Hose provided, but it is strongly recommended to keep the original one. The supplied one...

Universal USB plug / charger.  Model with USB output in 5V , sold with its handlebar fastening system.    Length of the wires for the connection to your motorcycle battery / wire harness : 110 cm Socket diameter : 27 mm

Pair of anodized aluminum bar end plugs, available in several colors. Universal flat model, with a discreet offset.   Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided). These handlebar caps can also be installed on handlebars with an integrated 6mm threaded spot (6 mm screw provided)....

Universal mechanical watch, to be installed on all handlebars with an outer diameter of 22 or 25 mm. Check the available space on your handlebars to make sure you can install it. Measures : Outer diameter : 45mm Height (above handle-bars) : 12mm, the rest will be integrated into the handle bars  Battery not included.

Side kickstand foot enlarger, in anodized aluminum, specific for the following  SUZUKI  :   BURGMAN 650 2013 - 2020 V-STROM DL1000 2014 - 2019 VSTROM DL1050 2020   Dear Bikers, please note that this kickstand foot enlarger is designed to be installed on a new, undamaged side stand. In...

Box of heat shrink tubings / sleeves made of polyolefin. The kit is composed of 150 pieces. For details, please refer to the table below.

Assortment box of insulated electrical crimp connectors - 180 pcs    3 different sizes Red : for cables with a cross-section of up to 1.5mm². Blue : for cables with cross-sections from 1 to 2.5mm². Yellow : for cables with cross-sections from 2.6 to 6mm². <p...

Multi-position hinged brake fluid reservoir bracket in anodized aluminum.

3D Adhesive covering film, available in different carbon colors. Suitable for various uses, adaptable to all your projects and at the height of your imagination!    Dimensions per unit (x1): 1.27m x 0.5m and 0.15mm thick.

Motorbike insurance slip or tax disc Hexagonal shape holder. Available in different colors, measures displayed on the last photos.