Handlebar tie-down clamps.
Measurements and technical information :
LENGTH : 11 cm
WIDTH : 6,8 cm
Hole DIAMETER (to pass the strap through) : 2,15 cm
Sold by pair, such as shown in the pictures.
Handlebar tie-down clamps.
Measurements and technical information :
LENGTH : 11 cm
WIDTH : 6,8 cm
Hole DIAMETER (to pass the strap through) : 2,15 cm
Sold by pair, such as shown in the pictures.
Self-retracting ratchet strap and its 2 "S" shaped hooks.
Measurements and technical information :
LENGTH 1 : 5,0 m
LENGTH 2 (partie avec cliquet) : 37 cm
WIDTH : 2,5 cm
FIXATION TYPE : "S" Shaped hooks with rubber protection
Sold by pair, such as shown in the pictures.
Self-retracting ratchet strap and its 2 "S" shaped hooks.
Measurements and technical information :
LENGTH 1 : 5,0 m
LENGTH 2 (partie avec cliquet) : 37 cm
WIDTH : 2,5 cm
FIXATION TYPE : "S" Shaped hooks with rubber protection
Sold by pair, such as shown in the pictures.
Automatic tie down strap with ratchet tensioner and its 2 hooks to secure the bike transport.
Measurements and technical information :
LENGTH : 18 cm
Unwound LENGTH : 1,6 m
WIDTH : 2,6 cm
FIXATION TYPE : "S" Hooks with rubber protection
Sold by...
Automatic tie down strap with ratchet tensioner and its 2 hooks to secure the bike transport.
Measurements and technical information :
LENGTH : 18 cm
Unwound LENGTH : 1,6 m
WIDTH : 2,6 cm
FIXATION TYPE : "S" Hooks with rubber protection
Sold by...
Pair of rear-view mirrors adapters to replace the OEM mirrors with adaptable ones, and ensure a nice finish on the front fairing.
Sold by pair, hardware not included. Designed for all our universal rear view mirrors.
Two models available - See Below
Pair of rear-view mirrors adapters to replace the OEM mirrors with adaptable ones, and ensure a nice finish on the front fairing.
Sold by pair, hardware not included. Designed for all our universal rear view mirrors.
Two models available - See Below
Universal Oil draining and stocking pan.
LENGTH : 60 cm
WIDTH : 33 cm
THICKNESS : 10,5 cm
JERRYCAN CAPACITY : 8 Liters
INPUT DIAMETER : 2,75 cm
OUTPUT DIAMETER : 3,8 cm
Sold per unit, as displayed on pictures.
Universal Oil draining and stocking pan.
LENGTH : 60 cm
WIDTH : 33 cm
THICKNESS : 10,5 cm
JERRYCAN CAPACITY : 8 Liters
INPUT DIAMETER : 2,75 cm
OUTPUT DIAMETER : 3,8 cm
Sold per unit, as displayed on pictures.
Universel overflow collector, suitable for most motorbikes.
LENGTH : 132 mm
WIDTH : 80 mm
THICKNESS : 48 mm
JERRYCAN CAPACITY : 250 ml
INPUT DIAMETER : 8 mm
OUTPUT DIAMETER : 15 mm
TIE DOWN LENGTH : 390 mm
HOSE : 8 mm x 2000 mm
Sold as shown on the...
Universel overflow collector, suitable for most motorbikes.
LENGTH : 132 mm
WIDTH : 80 mm
THICKNESS : 48 mm
JERRYCAN CAPACITY : 250 ml
INPUT DIAMETER : 8 mm
OUTPUT DIAMETER : 15 mm
TIE DOWN LENGTH : 390 mm
HOSE : 8 mm x 2000 mm
Sold as shown on the...
Steel Wheel block / Paddock wheel chock for motorbike. To be installed on a trailer, in a Van, on a lifting platform, etc…
Suitable for all the front wheels from 15 to 21 inches.
Sold such as shown in the pictures.
Steel Wheel block / Paddock wheel chock for motorbike. To be installed on a trailer, in a Van, on a lifting platform, etc…
Suitable for all the front wheels from 15 to 21 inches.
Sold such as shown in the pictures.
Anodized aluminum brake fluid reservoir with adjustable mounting bracket
It fits in the place of any reservoir separate from the master cylinder. Depending on the bike, it will be suitable for the front as well as for the rear, and for the clutch when it is a hydraulic system.
Caution , this is an...
Anodized aluminum brake fluid reservoir with adjustable mounting bracket
It fits in the place of any reservoir separate from the master cylinder. Depending on the bike, it will be suitable for the front as well as for the rear, and for the clutch when it is a hydraulic system.
Caution , this is an...
Aftermarket rear brake fluid reservoir kit including the plastic reservoir + the anodized aluminum cap.
Universal model. To avoid mistakes, we invite you to check the type of fastening of your original reservoir before ordering.
Height: About 45mm
Width: ...
Aftermarket rear brake fluid reservoir kit including the plastic reservoir + the anodized aluminum cap.
Universal model. To avoid mistakes, we invite you to check the type of fastening of your original reservoir before ordering.
Height: About 45mm
Width: ...
Transmission Chain Cleaning Brush
Hard plastic with nylon bristles
Easy grease removal and maintenance
Dual Use: One side for cleaning the chain and one side for the crown and corners
Time-saving with its "U" shape for cleaning chain links in a single pass
Preserve your chain for a longer life
Ideal for increasing the life...
Transmission Chain Cleaning Brush
Hard plastic with nylon bristles
Easy grease removal and maintenance
Dual Use: One side for cleaning the chain and one side for the crown and corners
Time-saving with its "U" shape for cleaning chain links in a single pass
Preserve your chain for a longer life
Ideal for increasing the life...
Short windscreen in polycarbonate with front fairing’s extension, specific to the following HONDA :
<table cellspacing="0" cellpadding="0" dir="ltr" border="1"...
Short windscreen in polycarbonate with front fairing’s extension, specific to the following HONDA :
<table cellspacing="0" cellpadding="0" dir="ltr" border="1"...
Transmission belt pulley cover, with CB650F logo, specific for HONDA :
Important : This transmission cover perfectly fits on all the mentioned models, but the logo will always be CB650F. Another model without logo is...
Transmission belt pulley cover, with CB650F logo, specific for HONDA :
Important : This transmission cover perfectly fits on all the mentioned models, but the logo will always be CB650F. Another model without logo is...