Hand-guards with double mounting points : at the handlebar end and the handlebar centre Sold by pair, with holding bars and deflectors Made In Australia Product sold such as shown in the photos. Top brand products in stock at incredible prices, so what's the secret? We can't tell you, but one thing is for sure, the stock is limited.

Pair of universal  LED  turn signals in aluminum. New model with 1 powerful LED light, orange color.

Pair of universal rubber and foam handlebar grips with an internal diameter of  22 mm  on the left side (clutch) and  24 mm  on the right side (throttle).   Measures : Length : 120 mm Depth : Hollow (empty) Diameter: 32 mm   Sold by...

Pair of rubber handlebar grips with an internal diameter of  22 mm  on the left side (clutch) and  24 mm  on the right side (throttle).   Measures : Length: 123 mm Depth: 118 mm Diameter: 31 mm   ...

Pair of riser adjustments for tapered handlebars with a 22mm external diameter. Available in different colours. Anodized machined aluminum risers with a 6-months warranty on anodizing. Total height : 50 mm Mounting bolt diameter : 12...

Pair of riser adjustments for tapered handlebars with a 28mm external diameter at the center. Available in different colours. Anodized machined aluminum risers with a 6-months warranty on anodizing. Total height : 50 mm Mounting bolt diameter : 10 mm

Lever guards made of anodized aluminum. Universal model with fasteners adaptable to all handlebars with an inner diameter of 14 or 18 mm. The length of the protection is adjustable (see photos), and the end tip reclining. Available in different colors. Sold by pairs only.

Hand-guards with simple mounting point : at the handlebar end Sold by pair Made In Australia Product sold such as shown in the photos. Top brand products in stock at incredible prices, so what's the secret? We can't tell you, but one thing is for sure, the stock is limited.

Aluminium fastening rail, with a square shape.    Measurements and technical information : LENGTH : 50 cm WIDTH : 33.5 mm HEIGHT : 13.2 mm TYPE OF FIXING : BY SCREWS (Not provided) HOLES NUMBER : 6 HOLES DIAMETRE : 6.3 mm DISTANCE BETWEEN THE MOUNTING HOLES : 102 / 77...

Aluminium fastening rail, with a round / semi circular shape.    Measurements and technical information : LENGTH : 50 cm WIDTH : 44 mm HEIGHT : 10 mm TYPE OF FIXING : By Screw (Not provided) HOLES NUMBER : 6 HOLES DIAMETRE : 8 mm DISTANCE BETWEEN THE MOUNTING HOLES : 102 / 77...

Pair of anodised aluminum fork pre load adjusters. Available diameters : 14 mm , 17 mm , 19 mm , 22 mm

Pair of handlebar risers for motorcycles with a 22mm external diameter handlebar. Available in different colours. Anodized machined aluminum risers, with a 6-months warranty on anodizing, hardware included.

Pair of handlebar risers for motorcycles with a 28mm external diameter handlebar. Available in different colours. Anodized machined aluminum risers, with a 6-months warranty on anodizing, hardware included.

Pair of universal risers in anodised machined aluminum, suitable for all motorcycles with a 22 mm diameter handlebar.    Height of the riser  : 19mm     Available in different colors.  Sold by pair. Hardware included.

Pair of universal risers in anodised machined aluminum, suitable for all motorcycles with a 28 mm diameter handlebar.    Height of the riser : 15mm Distance between the mounting holes : 40mm     Available in different colors.  Sold by pair....

Pair of resistors for LED turn indicators. Sold by pairs. 1 pair of resistors is necessary for 1 pair of LED turn signals (USUALLY enough, although we cannot take responsibility if it is not : on some rare models you may need more than 1 resistor per blinker).  Power : 10W 10 ohm

Pair of resistors for LED turn indicators.   Sold by pairs. 1 pair of resistors is necessary for 1 pair of LED turn signals (USUALLY enough, although we cannot take responsibility if it is not : on some rare models you may need more than 1 resistor per blinker).   Power :  20 W 10 oHm 20 W 15 oHm

Pair of rearview mirrors (left AND right mirror) in anodised aluminum, with small offset and adjustable arms. CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars.   Please read the below description to check installation possibilities and advices. Remember to check the...

Pair of round, bar end rearview mirrors. Two models/designs available (see pictures), one being proposed in fix or foldable version.    These mirrors will adapt on all handlebars with an inner diameter of 14mm or 18mm (fastening adapters included), or threaded with a 8mm diameter (M8).  Remember to check the inner diameter of your...

Pair of rearview mirrors (left AND right mirrors) in machined anodised aluminum and in plastic. Sold per unit or by pair, different colors available, necessary hardware included. Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed...