Adhesive tank pad protection, design CBR . Designed for many  HONDA  models. (You can see the detailed list below in the description).   MEASURES (L x H) :  220mm x 170mm

Connecting rod in different sizes:   Steel rod for male models Anodised aluminium rod for female models Possibility of cutting the female rods back a few millimetres for a better fit Classic pitch on one side, reverse pitch on the other side M6 thread diameter Quality ball joints Available...

Handlebar tie-down clamps.    Measurements and technical information : LENGTH : 11 cm WIDTH : 6,8 cm Hole DIAMETER (to pass the strap through) : 2,15 cm    Sold by pair, such as shown in the pictures.

Universal fluorescent wheel rim tape. Fluorescent racing wheel rim tape pre-cut in 1/3. 12 parts designed to equip a complete motorcycle. 3 pars per rim side.   Ready to apply on 17” clean rims.   Width : 6mm

Universal neoprene Foam Seat, model to cut out. Several thicknesses are available, 15 and 20mm. Side length: 33 cm The Foam is supplied with adhesive, so the product is ready to use, directly to stick on your racing fairing previously degreased.

Front sprocket OGNIBENE . Made In Italy . The front sprocket has a width of 525. Photo as an example. List of the compatibilities under the description. Any product that has been opened, assembled or has traces of handling cannot be returned, exchanged or refunded. Top brand products in stock at incredible prices,...

Holder for phone, navigation system or radar detector. 5 types of fastenings (handlebar or screw). Sold in kit: phone cover and fixing system.    Phone's minimum width : 4.5 cm Phone's maximum width : 9.5 cm    All the necessary technical information can be found below in the description.

Pack of 10 M6 DRC Aluminium Spacers Type 31 Made In Japan Great brand name products in stock at unbelievable prices, so what's our secret? We can't tell you, but one thing is for sure, stock is limited.

Self-retracting ratchet strap and its 2 "S" shaped hooks. Measurements and technical information : LENGTH 1 : 5,0 m LENGTH 2 (partie avec cliquet) : 37 cm WIDTH : 2,5 cm FIXATION TYPE : "S" Shaped hooks with rubber protection      Sold by pair, such as shown in the pictures.

Universal Oil draining and stocking pan.   LENGTH : 60 cm WIDTH : 33 cm THICKNESS : 10,5 cm JERRYCAN CAPACITY : 8 Liters INPUT DIAMETER : 2,75 cm OUTPUT DIAMETER : 3,8 cm    Sold per unit, as displayed on pictures. 

Universel overflow collector, suitable for most motorbikes.    LENGTH : 132 mm WIDTH : 80 mm THICKNESS : 48 mm JERRYCAN CAPACITY : 250 ml INPUT DIAMETER : 8 mm OUTPUT DIAMETER : 15 mm TIE DOWN LENGTH : 390 mm HOSE : 8 mm x 2000 mm    Sold as shown on the...

M51x4 Front Brake fluid reservoir cap for many  HONDA models.   You will find the motorcycles compatibility list below.

M20x2.5  oil filler cap for many HONDA models. You will find the motorcycles compatibility list below.

DANY triangular neoprene Foam Seat. Thickness : 12mm. The Foam is supplied with adhesive, so the product is ready to use, directly to stick on your racing fairing previously degreased.

Adhesive tank pad protection, design CBR . Designed for many  HONDA  models. (You can see the detailed list below in the description).

Adhesive tank pad protection, design RR . Designed for many  HONDA  models (You can find the detailed list below in the description)   MEASURES (L x H) :  210mm x 150mm

Assortment box of insulated electrical crimp connectors - 180 pcs    3 different sizes Red : for cables with a cross-section of up to 1.5mm². Blue : for cables with cross-sections from 1 to 2.5mm². Yellow : for cables with cross-sections from 2.6 to 6mm². <p...

M37x4 Rear Brake fluid reservoir cap for many HONDA  models.    You will find the motorcycles compatibility list below.

Aftermarket brake fluid reservoir kit including the plastic reservoir + the anodized aluminum cap + the anodized aluminum bracket. Fits on almost all motorcycles with a separate brake fluid reservoir from the master cylinder Hose provided, but it is strongly recommended to keep the original one. The supplied one...

Box of heat shrink tubings / sleeves made of polyolefin. The kit is composed of 150 pieces. For details, please refer to the table below.