Handlebar tie-down clamps.
Measurements and technical information :
LENGTH : 11 cm
WIDTH : 6,8 cm
Hole DIAMETER (to pass the strap through) : 2,15 cm
Sold by pair, such as shown in the pictures.
Handlebar tie-down clamps.
Measurements and technical information :
LENGTH : 11 cm
WIDTH : 6,8 cm
Hole DIAMETER (to pass the strap through) : 2,15 cm
Sold by pair, such as shown in the pictures.
Self-retracting ratchet strap and its 2 "S" shaped hooks.
Measurements and technical information :
LENGTH 1 : 5,0 m
LENGTH 2 (partie avec cliquet) : 37 cm
WIDTH : 2,5 cm
FIXATION TYPE : "S" Shaped hooks with rubber protection
Sold by pair, such as shown in the pictures.
Self-retracting ratchet strap and its 2 "S" shaped hooks.
Measurements and technical information :
LENGTH 1 : 5,0 m
LENGTH 2 (partie avec cliquet) : 37 cm
WIDTH : 2,5 cm
FIXATION TYPE : "S" Shaped hooks with rubber protection
Sold by pair, such as shown in the pictures.
Automatic tie down strap with ratchet tensioner and its 2 hooks to secure the bike transport.
Measurements and technical information :
LENGTH : 18 cm
Unwound LENGTH : 1,6 m
WIDTH : 2,6 cm
FIXATION TYPE : "S" Hooks with rubber protection
Sold by...
Automatic tie down strap with ratchet tensioner and its 2 hooks to secure the bike transport.
Measurements and technical information :
LENGTH : 18 cm
Unwound LENGTH : 1,6 m
WIDTH : 2,6 cm
FIXATION TYPE : "S" Hooks with rubber protection
Sold by...
Universal Oil draining and stocking pan.
LENGTH : 60 cm
WIDTH : 33 cm
THICKNESS : 10,5 cm
JERRYCAN CAPACITY : 8 Liters
INPUT DIAMETER : 2,75 cm
OUTPUT DIAMETER : 3,8 cm
Sold per unit, as displayed on pictures.
Universal Oil draining and stocking pan.
LENGTH : 60 cm
WIDTH : 33 cm
THICKNESS : 10,5 cm
JERRYCAN CAPACITY : 8 Liters
INPUT DIAMETER : 2,75 cm
OUTPUT DIAMETER : 3,8 cm
Sold per unit, as displayed on pictures.
Made In Australia Product sold such as shown in the photos. Top brand products in stock at incredible prices, so what's the secret? We can't tell you, but one thing is for sure, the stock is limited.
Made In Australia Product sold such as shown in the photos. Top brand products in stock at incredible prices, so what's the secret? We can't tell you, but one thing is for sure, the stock is limited.
Sold by pair
For mounting with BARKBUSTERS VPS, STORM and JET shields Made In Australia Product sold such as shown in the photos. Top brand products in stock at incredible prices, so what's the secret? We can't tell you, but one thing is for sure, the stock is limited.
Sold by pair
For mounting with BARKBUSTERS VPS, STORM and JET shields Made In Australia Product sold such as shown in the photos. Top brand products in stock at incredible prices, so what's the secret? We can't tell you, but one thing is for sure, the stock is limited.
X Racer Lithium high performance battery.
List of compatible models below the description.
When receiving your order, please check that the reference received corresponds to the reference ordered. Opened, marked, used or damaged products will not be returned, exchanged or refunded.
This item is available in several ranges and finishes, go to your...
X Racer Lithium high performance battery.
List of compatible models below the description.
When receiving your order, please check that the reference received corresponds to the reference ordered. Opened, marked, used or damaged products will not be returned, exchanged or refunded.
This item is available in several ranges and finishes, go to your...
Universel overflow collector, suitable for most motorbikes.
LENGTH : 132 mm
WIDTH : 80 mm
THICKNESS : 48 mm
JERRYCAN CAPACITY : 250 ml
INPUT DIAMETER : 8 mm
OUTPUT DIAMETER : 15 mm
TIE DOWN LENGTH : 390 mm
HOSE : 8 mm x 2000 mm
Sold as shown on the...
Universel overflow collector, suitable for most motorbikes.
LENGTH : 132 mm
WIDTH : 80 mm
THICKNESS : 48 mm
JERRYCAN CAPACITY : 250 ml
INPUT DIAMETER : 8 mm
OUTPUT DIAMETER : 15 mm
TIE DOWN LENGTH : 390 mm
HOSE : 8 mm x 2000 mm
Sold as shown on the...
Universal plastic Fork block / Dumper block for Off Road / SM / Enduro …
Two sizes available :
Model 1 : 21 cm
Model 2 : 29 cm
Sold such as shown in the pictures.
Universal plastic Fork block / Dumper block for Off Road / SM / Enduro …
Two sizes available :
Model 1 : 21 cm
Model 2 : 29 cm
Sold such as shown in the pictures.
Steel Wheel block / Paddock wheel chock for motorbike. To be installed on a trailer, in a Van, on a lifting platform, etc…
Suitable for all the front wheels from 15 to 21 inches.
Sold such as shown in the pictures.
Steel Wheel block / Paddock wheel chock for motorbike. To be installed on a trailer, in a Van, on a lifting platform, etc…
Suitable for all the front wheels from 15 to 21 inches.
Sold such as shown in the pictures.
Anodized aluminum brake fluid reservoir with adjustable mounting bracket
It fits in the place of any reservoir separate from the master cylinder. Depending on the bike, it will be suitable for the front as well as for the rear, and for the clutch when it is a hydraulic system.
Caution , this is an...
Anodized aluminum brake fluid reservoir with adjustable mounting bracket
It fits in the place of any reservoir separate from the master cylinder. Depending on the bike, it will be suitable for the front as well as for the rear, and for the clutch when it is a hydraulic system.
Caution , this is an...
Aftermarket rear brake fluid reservoir kit including the plastic reservoir + the anodized aluminum cap.
Universal model. To avoid mistakes, we invite you to check the type of fastening of your original reservoir before ordering.
Height: About 45mm
Width: ...
Aftermarket rear brake fluid reservoir kit including the plastic reservoir + the anodized aluminum cap.
Universal model. To avoid mistakes, we invite you to check the type of fastening of your original reservoir before ordering.
Height: About 45mm
Width: ...
Assortment box of insulated electrical crimp connectors - 180 pcs
3 different sizes
Red : for cables with a cross-section of up to 1.5mm².
Blue : for cables with cross-sections from 1 to 2.5mm².
Yellow : for cables with cross-sections from 2.6 to 6mm².
<p...
Assortment box of insulated electrical crimp connectors - 180 pcs
3 different sizes
Red : for cables with a cross-section of up to 1.5mm².
Blue : for cables with cross-sections from 1 to 2.5mm².
Yellow : for cables with cross-sections from 2.6 to 6mm².
<p...
Rear brake or clutch fluid reservoir cap in CNC 6061 anodised aluminum, round model, adaptable on numerous motorcycle models (compatibility list available below).
Inner diameter (thread) : 3,48 cm
NOTE : The design of the cap that you will receive will be slightly different from the one displayed on pictures.
Rear brake or clutch fluid reservoir cap in CNC 6061 anodised aluminum, round model, adaptable on numerous motorcycle models (compatibility list available below).
Inner diameter (thread) : 3,48 cm
NOTE : The design of the cap that you will receive will be slightly different from the one displayed on pictures.
Coolant Radiator Cap, different pressure settings, for 0.9 to 2 bar.
Fast plug and play assembly
Replaces your original cap without modification
Fixation by ¼ turn
Different pressure calibrations depending on your bike or use
Resistant to the following pressure : 0.9 / 1.1 / 1.3 / 1.6 / 1.8 / 2 bar
Very...
Coolant Radiator Cap, different pressure settings, for 0.9 to 2 bar.
Fast plug and play assembly
Replaces your original cap without modification
Fixation by ¼ turn
Different pressure calibrations depending on your bike or use
Resistant to the following pressure : 0.9 / 1.1 / 1.3 / 1.6 / 1.8 / 2 bar
Very...
Silicone plug for exhaust muffler compatible with all the 2 strokes / 4 strokes motorcycles.
2 sizes available :
S / SMALL : the small one is suggested for the 2 strokes
L / LARGE : the big one is suggested for the 4 strokes
Silicone plug for exhaust muffler compatible with all the 2 strokes / 4 strokes motorcycles.
2 sizes available :
S / SMALL : the small one is suggested for the 2 strokes
L / LARGE : the big one is suggested for the 4 strokes
Brake master cylinder / Clutch perch bar clamp, universal model to be adapted on a majority of motorcycle models on the market (22mm).
Available in 6 different colors. Sold per unit.
Brake master cylinder / Clutch perch bar clamp, universal model to be adapted on a majority of motorcycle models on the market (22mm).
Available in 6 different colors. Sold per unit.