Self-retracting ratchet strap and its 2 "S" shaped hooks. Measurements and technical information : LENGTH 1 : 5,0 m LENGTH 2 (partie avec cliquet) : 37 cm WIDTH : 2,5 cm FIXATION TYPE : "S" Shaped hooks with rubber protection      Sold by pair, such as shown in the pictures.

Universal Oil draining and stocking pan.   LENGTH : 60 cm WIDTH : 33 cm THICKNESS : 10,5 cm JERRYCAN CAPACITY : 8 Liters INPUT DIAMETER : 2,75 cm OUTPUT DIAMETER : 3,8 cm    Sold per unit, as displayed on pictures. 

Universel overflow collector, suitable for most motorbikes.    LENGTH : 132 mm WIDTH : 80 mm THICKNESS : 48 mm JERRYCAN CAPACITY : 250 ml INPUT DIAMETER : 8 mm OUTPUT DIAMETER : 15 mm TIE DOWN LENGTH : 390 mm HOSE : 8 mm x 2000 mm    Sold as shown on the...

M20x2.5  oil filler cap for many TRIUMPH models. You will find the motorcycles compatibility list below.

Adhesive tank pad protection, design  TRIUMPH .

Adhesive tank pad protection, design  TWIN .

Assortment box of insulated electrical crimp connectors - 180 pcs    3 different sizes Red : for cables with a cross-section of up to 1.5mm². Blue : for cables with cross-sections from 1 to 2.5mm². Yellow : for cables with cross-sections from 2.6 to 6mm². <p...

Universal cable clutch perch, sold with its aftermarket clutch lever. Adaptation guaranteed on all handlebars with an outer diameter of 22mm. 

Aftermarket brake fluid reservoir kit including the plastic reservoir + the anodized aluminum cap + the anodized aluminum bracket. Fits on almost all motorcycles with a separate brake fluid reservoir from the master cylinder Hose provided, but it is strongly recommended to keep the original one. The supplied one...

Box of heat shrink tubings / sleeves made of polyolefin. The kit is composed of 150 pieces. For details, please refer to the table below.

Wheel rim tape with Speed  Twin  logo.   Racing model, pre-cut in 1/4, 16 parts designed to make a complete motorcycle. 3 parts per side of the front and rear rims with 8 bonus strips.   Width : about...

Wheel rim tape with VERSYS  logo.   Racing model, pre-cut in 1/4, 16 parts designed to make a complete motorcycle. 3 parts per side of the front and rear rims with 8 bonus strips.   Width : about 1 cm.

Universal wheel rim tape. Racing model, pre-cut in 1/3. 12 parts, designed to equip a complete motorcycle. 3 parts per rim side.   Ready to apply on 17” clean rims.   Width : 6mm

Universal wheel rim tape, solid color. Model set on roller, for a straight stripe laying. Ready to apply on 17” clean rims.   Width : 7 mm Length : 6m

Pair of anodized aluminum bar end plugs, available in several colors. Universal flat model, with a discreet offset.   Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided). These handlebar caps can also be installed on handlebars with an integrated 6mm threaded spot (6 mm screw provided)....

Pair of universal  LED  turn signals in plastic with a 3 LED light on the rear side of the turn signals, towards the pilot (white color).

Pair of universal LED turn signals in plastic with 5 SMD  LEDs  on the front, and 3 SMD LEDs on the rear side, both in orange.

Pair of universal  LED  turn signals in plastic, with 17 LED and an orange light.

6 parts universal tank pad protection, adaptable on all gas tanks.

Universal mechanical watch, to be installed on all handlebars with an outer diameter of 22 or 25 mm. Check the available space on your handlebars to make sure you can install it. Measures : Outer diameter : 45mm Height (above handle-bars) : 12mm, the rest will be integrated into the handle bars  Battery not included.