Adjustable / Foldable (Flip-Up) clutch lever specific to many  APRILIA, DUCATI, BIMOTA, MOTO GUZZI, MOTO MORINI, BENELLI and VOXAN. Detailed list of compatibilities per motorcycle and year below. If you...

Pair of universal rubber and anodised aluminum handlebar grips with an internal diameter of  22 mm  on the left side (clutch) and  24 mm  on the right side (throttle).   Measures : Length: 120 mm Depth: Hollow...

Pair of anodized aluminum bar end plugs, available in several colors. Universal bi-color model, with a 10mm long and 18mm diameter offset at the base.   Fits on all handlebars with an internal diameter of  14mm  or  18mm  (adapters provided) or with an integrated  6mm  threaded spot (6 mm screw provided).  Remember to check...

Pair of clip on handlebars (right AND left clip ons) designed for 50mm diameter forks, consisting of a pair of clamps and a pair of anodized CNC aluminum tubes.    Dimensions: Length of the tubes: 30 cm Outside diameter of the tubes: 22 mm Tube’s inner diameter : 16mm Angle of...

Kit of  reclining and raising clip on bracelets + handlebar tubes, designed to be installed on all motorcycles with front forks having a 50mm diameter.    Sold by pair (right AND left).    List...

6 parts universal tank pad protection, adaptable on all gas tanks.

Tire decorative pen / permanent marker. To be used on the sides or flanks of the tires, perfect to renew aging letters or to make a customized decoration.

<div id="product-description-short-1308" class="description-short" style="margin-top:12px;color:#777777;font-family:Rubik,...

Complete kit of rear-sets, specific for the following DUCATI :      <td style="border:1px...

Aftermarket brake fluid reservoir kit including the plastic reservoir + the anodized aluminum cap + the anodized aluminum bracket. Fits on almost all motorcycles with a separate brake fluid reservoir from the master cylinder Hose provided, but it is strongly recommended to keep the original one. The supplied one...

Pair of resistors for LED turn indicators. Sold by pairs. 1 pair of resistors is necessary for 1 pair of LED turn signals (USUALLY enough, although we cannot take responsibility if it is not : on some rare models you may need more than 1 resistor per blinker).  Power : 10W 10 ohm

Pair of anodized aluminum bar end plugs, available in several colors. Universal model with a covering plastic cap.   Fits on all handlebars with an internal diameter of  14mm  or  18mm  (adapters provided). These handlebar caps can also be installed on handlebars with an integrated  6mm  threaded spot (6 mm screw provided)....

Universal USB plug / charger.  Model with USB output in 5V , sold with its handlebar fastening system.    Length of the wires for the connection to your motorcycle battery / wire harness : 110 cm Socket diameter : 27 mm

Secondary LED light, universal model with a mounting bracket designed to fit on all handlebars with an external diameter of 22 or 28 mm. Very good lighting quality, white light color. 3200 Lumens Sold per unit.

Motorcycle-design key ring, different models available.

Pair of license plate LED lights. Mounted on a M5 integrated threaded screw (diameter 5 mm) for a direct and discreet installation on the license plate holder.   Sold by pair only.

Screw and cage nut in anodised aluminum. Sold per unit. Various colors available.

Pair of front or rear footpegs, depending on motorycles, aftermarket models built the same as OEM, specific to many DUCATI models.  You will find the motorcycles compatibility list below.    Caution  :  these foot-pegs will perfectly fit your motorcycle, but in...

Pair of universal aluminum rearview mirrors block off plates for many sportbikes and tourers. Measures : 6,1 x 2,1 cm

Pair of universal  LED  turn signals in plastic, with 17 LED and an orange light.