Aftermarket brake fluid reservoir kit including the plastic reservoir + the anodized aluminum cap + the anodized aluminum bracket.
Fits on almost all motorcycles with a separate brake fluid reservoir from the master cylinder
Hose provided, but it is strongly recommended to keep the original one. The supplied one...
Aftermarket brake fluid reservoir kit including the plastic reservoir + the anodized aluminum cap + the anodized aluminum bracket.
Fits on almost all motorcycles with a separate brake fluid reservoir from the master cylinder
Hose provided, but it is strongly recommended to keep the original one. The supplied one...
Pair of resistors for LED turn indicators.
Sold by pairs. 1 pair of resistors is necessary for 1 pair of LED turn signals (USUALLY enough, although we cannot take responsibility if it is not : on some rare models you may need more than 1 resistor per blinker).
Power : 10W 10 ohm
Pair of resistors for LED turn indicators.
Sold by pairs. 1 pair of resistors is necessary for 1 pair of LED turn signals (USUALLY enough, although we cannot take responsibility if it is not : on some rare models you may need more than 1 resistor per blinker).
Power : 10W 10 ohm
Pair of anodized aluminum bar end plugs, available in several colors. Universal model with a covering plastic cap.
Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided). These handlebar caps can also be installed on handlebars with an integrated 6mm threaded spot (6 mm screw provided)....
Pair of anodized aluminum bar end plugs, available in several colors. Universal model with a covering plastic cap.
Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided). These handlebar caps can also be installed on handlebars with an integrated 6mm threaded spot (6 mm screw provided)....
Universal USB plug / charger. Model with USB output in 5V , sold with its handlebar fastening system.
Length of the wires for the connection to your motorcycle battery / wire harness : 110 cm
Socket diameter : 27 mm
Universal USB plug / charger. Model with USB output in 5V , sold with its handlebar fastening system.
Length of the wires for the connection to your motorcycle battery / wire harness : 110 cm
Socket diameter : 27 mm
Secondary LED light, universal model with a mounting bracket designed to fit on all handlebars with an external diameter of 22 or 28 mm.
Very good lighting quality, white light color. 3200 Lumens
Sold per unit.
Secondary LED light, universal model with a mounting bracket designed to fit on all handlebars with an external diameter of 22 or 28 mm.
Very good lighting quality, white light color. 3200 Lumens
Sold per unit.
Pair of license plate LED lights. Mounted on a M5 integrated threaded screw (diameter 5 mm) for a direct and discreet installation on the license plate holder.
Sold by pair only.
Pair of license plate LED lights. Mounted on a M5 integrated threaded screw (diameter 5 mm) for a direct and discreet installation on the license plate holder.
Sold by pair only.
Universal anodised aluminum right-angle valve stems.
Diameter: 8.3 mm. Important : suitable for Italian and English models, however this model is NOT suitable for Japanese brands, which usually need an 11.3 mm diameter.
Dimensions :
Thread length :...
Universal anodised aluminum right-angle valve stems.
Diameter: 8.3 mm. Important : suitable for Italian and English models, however this model is NOT suitable for Japanese brands, which usually need an 11.3 mm diameter.
Dimensions :
Thread length :...
Pair of universal rubber and anodised aluminum handlebar grips with an internal diameter of 22 mm on the left side (clutch) and 24 mm on the right side (throttle).
Measures :
Length: 120 mm (+ 13 mm with end caps)
Depth:...
Pair of universal rubber and anodised aluminum handlebar grips with an internal diameter of 22 mm on the left side (clutch) and 24 mm on the right side (throttle).
Measures :
Length: 120 mm (+ 13 mm with end caps)
Depth:...
Aftermarket rear brake fluid reservoir kit including the plastic reservoir + the anodized aluminum cap.
Universal model. To avoid mistakes, we invite you to check the type of fastening of your original reservoir before ordering.
Height: About 45mm
Width: ...
Aftermarket rear brake fluid reservoir kit including the plastic reservoir + the anodized aluminum cap.
Universal model. To avoid mistakes, we invite you to check the type of fastening of your original reservoir before ordering.
Height: About 45mm
Width: ...
Pair of anodized aluminum bar end plugs, available in several colors. Universal flat model, with a discreet offset.
Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided). These handlebar caps can also be installed on handlebars with an integrated 6mm threaded spot (6 mm screw provided)....
Pair of anodized aluminum bar end plugs, available in several colors. Universal flat model, with a discreet offset.
Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided). These handlebar caps can also be installed on handlebars with an integrated 6mm threaded spot (6 mm screw provided)....
Relax cruise control throttle grip for right side handlebar grip. Made in plastic, it will easily install directly on your throttle grip and will allow you to relax your wrist during long journeys.
Universal model, will fit on nearly all accelerator grips.
Relax cruise control throttle grip for right side handlebar grip. Made in plastic, it will easily install directly on your throttle grip and will allow you to relax your wrist during long journeys.
Universal model, will fit on nearly all accelerator grips.
Adjustable / Foldable (also called Flip-Up) brake lever specific to many BMW models.
Detailed list of compatibilities per motorcycle and year available below.
If you want a color combination we don’t suggest (between main part of the lever, 6 positions dial and adjustable part), specify your choice within the 8 available...
Adjustable / Foldable (also called Flip-Up) brake lever specific to many BMW models.
Detailed list of compatibilities per motorcycle and year available below.
If you want a color combination we don’t suggest (between main part of the lever, 6 positions dial and adjustable part), specify your choice within the 8 available...
Universal mechanical watch, to be installed on all handlebars with an outer diameter of 22 or 25 mm.
Check the available space on your handlebars to make sure you can install it.
Measures :
Outer diameter : 45mm Height (above handle-bars) : 12mm, the rest will be integrated into the handle bars
Battery not included.
Universal mechanical watch, to be installed on all handlebars with an outer diameter of 22 or 25 mm.
Check the available space on your handlebars to make sure you can install it.
Measures :
Outer diameter : 45mm Height (above handle-bars) : 12mm, the rest will be integrated into the handle bars
Battery not included.