Pair of front footrests, aftermarket model based on the OEM, specific   to many HONDA . Sold by pairs, right foot peg and left foot-peg.

Pair of rearview mirrors, with CNC anodised aluminum arm and plastic mirror shell, with LED integrated turn signals.   Universal model for Naked, Sportbikes and Sport GT motorcycles (with adapters for the latter).

Protection slider for front fork specific to the following HONDA  :    Hornet 600 1998 - 2002 Hornet 600 2003 - 2004 Hornet S 600 2000 - 2003 CBR 600 F2 F3 1992 - 1998   Note  : pictures accurately display the kit, as you will receive it. Only the shaft rod can, in some...

Pair of rear (passenger) footrests, aftermarket model based on the OEM, specific many  HONDA  models.  You will find the motorcycles compatibility list below. If the fastening system is not provided or if the one you received is not...

Automatic tie down strap with ratchet tensioner and its 2 hooks to secure the bike transport.    Measurements and technical information : LENGTH : 18 cm Unwound LENGTH : 1,6 m WIDTH : 2,6 cm FIXATION TYPE : "S" Hooks with rubber protection    Sold by...

Pair of exhaust muffler AVDB brackets made in powder-coated steel    Caution : this model will not fit on exhaust systems without adjustable muffler clamps      Measurements (refer to the pictures for the dimensions legend)  : Lenght :...

Pair of universal  LED  turn signals in aluminum and an orange lighting.  Number of LED on each turn signal : 17 Length (out of screw thread) : 86 mm Width : 38 mm Screw diameter : 8 mm Wires length : 210 mm

Pair of universal  LED  turn signals in aluminum.  E8 E-marked  model, with  an orange light. All the universal turn signals models we propose are visible on the last photo!

Pair of universal  LED  turn signals in plastic with orange lighting and a blinking indicator on the rear of the turn signals, towards the pilot (blinking on both sides).

Pair of universal  LED  turn signals in plastic with 8 LEDs and an orange light.

Pair of bar end plugs in aluminum, with "CBR" logo engraved.  Specific model for HONDA CBR RR. Sold with their mounting screw.   Bar end plug length :  23mm Diameter :  31mm Bar end plug weight (without screw) :  50g

Pair of universal rubber and anodised aluminum handlebar grips with an internal diameter of  22 mm  on the left side (clutch) and  24 mm  on the right side (throttle).   Measures : Length: 120 mm Depth: Hollow...

Pair of universal  LED  turn signals in plastic.  E8 E-marked  model, with 15 LED and an orange light. Design with a center hole. For installation on MT07 / FZ07, you must install and reverse a  turn signal shutter  so the nut can be screwed on the turn signal's rod. 

Pair of universal  LED  turn signals in aluminum. New model with 1 powerful LED light, orange color.

Pair of universal LED turn signals in aluminum. E8 E-marked model, with 9 LED and an orange light.

Pair of anodized aluminum bar end plugs, available in several colors. Universal model with a covering plastic cap.   Fits on all handlebars with an internal diameter of  14mm  or  18mm  (adapters provided). These handlebar caps can also be installed on handlebars with an integrated  6mm  threaded spot (6 mm screw provided)....

Secondary LED light, universal model with a mounting bracket designed to fit on all handlebars with an external diameter of 22 or 28 mm. Very good lighting quality, white light color. 3200 Lumens Sold per unit.

Pair of universal rubber and anodised aluminum handlebar grips with an internal diameter of  22 mm  on the left side (clutch) and  24 mm  on the right side (throttle).   Measures : Length: 120 mm (+ 13 mm with end caps) Depth:...

Kit of adhesive tapes for the inner rim (front and rear). Model with RACING logo, designed for 17” rims.    Note : Depending on models, you may need to recut some of the tape, more information available below.

Kit of adhesive tapes for the inner rim (front and rear). Model with  CBR  logo, designed for 17” rims.   Note  : Depending on models, you may need to recut some of the tape, more information available below.