Trip & Maintenance - Tools
Tool to remove the fork caps, diameter 49 / 50 mm with 8 sides.
€19.00
CUSTOMER SERVICE(10H-13H / 14H-18H30) :
CUSTOMER SERVICE(10H-13H / 14H-18H30) :
18 products
Filtre
Trip & Maintenance - Tools
Tool to remove the fork caps / plugs, specific for the following fork :
OHLINS TTX25 / NIX / FGRT
€39.00
Trip & Maintenance - Tools
Tool to remove the fork caps / plugs, specific for the following fork :
OHLINS FGK 8 PIN
€34.00
Trip & Maintenance - Tools
Tool to remove the fork caps / plugs, specific for the following fork :
OHLINS FGK 4 PIN
€39.00
Trip & Maintenance - Tools
Small universal toolbox to be stowed (ideally) under the seat of your motorcycle. Ideal for emergency use.
Delivered as shown on the photos.
€12.00
Trip & Maintenance - Tools
Transmission Chain Cleaning Brush
Hard plastic with nylon bristles
Easy grease removal and maintenance
Dual Use: One side for cleaning the chain and one side for the crown and corners
Time-saving with its "U" shape for cleaning chain links in a single pass
Preserve your chain for a longer life
Ideal for increasing the life...
€5.00
Trip & Maintenance - Tools
€9.00
Trip & Maintenance - Tools
Hook spanner for damper 55 mm.
Made of treated steel for better durability.
€9.00
Trip & Maintenance - Tools
Box of heat shrink tubings / sleeves made of polyolefin.
The kit is composed of 150 pieces. For details, please refer to the table below.
€14.00
€19.00
Trip & Maintenance - Tools
Tool to remove the fork caps, diameter 48 mm with 8 sides.
€19.00
€19.00
Trip & Maintenance - Tools
Tool to remove the fork caps, diameter 49 mm with 6 sides.
€19.00
Trip & Maintenance - Tools
Tool to remove the fork caps, diameter 46 / 50 mm with 8 sides.
€19.00
Trip & Maintenance - Tools
Mixed 30 and 55mm socket in aluminium, specific to the following DUCATI .(non exhaustive list at the bottom of the description)
Made of aluminium for excellent resistance and durability
30mm hexagon socket for front wheel axles
A 55mm 12-sided socket for the rear wheel nuts
Suitable for a large...
€19.00
Trip & Maintenance - Tools
Clutch nut locking pliers
Made of stainless steel
Locking vice-grip type
Maximum spacing 122mm
Total length 29.5cm
Adjustable spacing by means of a thumbwheel
Allows clutch nut to be locked for tightening and loosening
Prevents damage to the nut
€29.00
Trip & Maintenance - Tools
Pair of radiator hose removal tools
Non-slip handle
Steel shaft diameter 6mm
1 model at 180°
1 model at 90°
For removing cooling hoses without damaging them
€9.00
Trip & Maintenance - Tools
Bi-function screwdriver for carburettor adjustment
L-shaped spanner with 8mm hexagon socket
Usable length 28.5cm
1 flat screwdriver
Usable length 29.5cm
Ideal for adjusting your carburettor timing
€9.00
Trip & Maintenance - Tools
Internal / external circlip pliers with interchangeable tips
4 different tips :
2 flat
1 bent at 45°
1 bent at 90°
For circlips from 10 to 50mm
Internal or external circlips depending on tip position
Interchangeable tips in seconds
€9.00
Trip & Maintenance - Tools
Automatic Safety Wire Pliers
Locking ring to keep pliers closed
Cutting pliers section
Knurl with worm screw for interweaving the safety wire
Wire not supplied
€19.00
Trip & Maintenance - Tools
Assortment box of insulated electrical crimp connectors - 180 pcs
3 different sizes
Red : for cables with a cross-section of up to 1.5mm².
Blue : for cables with cross-sections from 1 to 2.5mm².
Yellow : for cables with cross-sections from 2.6 to 6mm².
<p...
€14.00